well,if i incorperate the acura cl struts up front and keep all my upper and lower tie,tower bars and sway bars,there should be no problems with weight transfer around corners. I have access to all the tools and materials to make this engine fit because its what I do for a living. I am also very good with wiring but with the cl having so many more electrical features than a 95 civic. wiring will be a nightmare. I'll most likely have to say the hell with the a/c and heating and maybe have to wire up some after market gauges because it would be so much easier than trying to tap into the factory gauges. would need to use the cabin harness from the cl too and ecu of course. would need an aftermarket pump that is up to stock 3.2 vtec specs.