Hey guys, i just took a stab at putting in my DC CC headers with no results.

I have a 97 SH, turns out the studs on the catalytic converter are rusted so bad that i cant see/feel the thread on them. Does anyone have any cool tricks to share with me? I've already tried the wrench and hammer... no luck with that....

I had another problem with the bolts that connect the A to B pipe... where the headers go from 4 to 2. Is there any other way besides using an extension to reach these bolts? I had to use a pretty long extension to reach up there from under the car, but i lost a lot of torque through the extension, so it was really difficult.

Thanks in advance for any input!