Honda TPS sensors are screwed on using torque-break screws, they are like regular screws but the head breaks off when the set torque is reached....you can use almost any TPS for any honda from 88+. I have a couple lying around I can sell you that work fine. The best way to remove the old one is to use a hacksaw blad, cut a slit in the head of the screw and unscrew it. When you screw on the new sensor you must have the ignition turned on and a voltmeter handy. Rotate the TPE until it reads .45VDC or below when closed and 4.5+VDC at WOT and viola, you are done.