Originally posted by insomniac791
I just recently had a b16 installed in my 91 CRX Si they used Hasport shift linkage and mounts and a ys1 LSD tranny and ACT street strip clutch. Everyhting seemed fine until they let it off stands and it will not go in any gear when the car is running it just grinds when you try. But you can turn the car off and it will shift through the gears fine? You can put it in gear and turn the car on and it will roll. Any ideas?
thanks
Later
Matt
if you had it installed then the shop should be responsible for the problem...you paid them to do it
i think your clutch cable may have broke or is so loose it is not engaging the clutch causing you to grind gears when you try to shift with the engine running...i doubt if the shift linkage is bad as you can get it into gear without the car running