hey i put 2 new pics on my site, one of the engine bay and the oil filter relocated and the pic under that one of the oil cooler and thermostatic control valve location, can barely see the oil cooler.

was a very tight fit because of the power steering cooler and intercooler.

finding space for everything was the hardest part
i got the oil filter relocated to the left side of the engine bay
the oil cooler took a while to get in between the a/c condenser and intercooler. i had to loosen up the radiator and a/c condenser brackets to fit my hand in to secure oil cooler

i used leather gloves, it took a little more time but it prevented my hands from getting cut up by the radiator or a/c condenser.

the rest was easy, take off oil filter, put on adapter, run lines to relocated oil filter, thermo valve, oil cooler

make sure that the adapter can screw all the way tight because mine did not the first time installing and i had to call b&m to send correct adapter. this is my 1st but 2nd install. also i had to buy 8 feet extra hose.

oh, yeah make sure you cold start car to build up oil pressure and bleed hoses of air until the oil light goes out. took me 4-5 cranks, 5 seconds a piece.
boostlee pics