I got a quick question for you guys in my endless quest to wire my 92 civic. I got a 92 civic cx, with a b18c1 in it. I bought the obd1 ecu (should be here tomarrow), so I'm reading up on how to install it. I think I got the basic steps down, but I got a question about the wires coming from the harness. I've read that I need to wire 7 wires so vtec will work. I see that each wire is color coded (ex. - yellow/green = vtec sol.), and I know the pins that the wire must be connected to on the ecu (ex. - vtec sol. = A4). Do I have to switch the wire from its original location on the harness and move it to the correct location? For example, I found the yellow/green wire for the vtec sol. but its not in the right location (A4), so should I remove the wire from the location its in, and plug it into A4? Also, when changing the location of the wires is there a special way to remove and plug in the wire? Thanks for the help.