HA, I just got back from Philly myself. I Actually dont recommend that you sand sown the clear with the 2000 cause afterwards, ure gonna have to use a rubbing compund which is gonna take off a lot of the clear u put on. just let it sit for a while and wait for the curing process to complete. and its kinda funny cause when i finished painting my car last month, it turned out glossy from the first minute i got it on. Did you lay on the clear coat thick or multiple coats of thin? cause if it were the thin, you F'ed up. Du Pont and transtar recommends that you lay on a layer 2.2-3.6 mils thick within 2-3 coats (meaning the layers will still have to be flowing when applying # 2+3 coats). itll still be ok, but not the quality finish that you can get.