My ignition timing sucks. It used to be great with my 8v engine, and now it's hit-or-miss since the 16v was dropped in. I re-used the distributor from the cx engine because it worked, and because the dx distributor got broken to pieces by I don't know who when this engine was pulled. I replaced the cap and rotor, wires and plugs less than 900 miles ago.

I have the plugs gapped to where the cx should be. I set base timing without a timing light, but after several attempts to re-adjust it, I get the same results. I'm not sure if it's burning all the gas because I keep setting off my CEL with a code 1 if I floor it for 5 seconds at low RPMs, and it feels jerky.

I'm wondering if the cx distributor is any different from the dx? Plugs are the same, dimensions are the same. Cap and rotor are the same for both... Anyone have access to this info? Distributors aren't cheap. I am.