Originally posted by pinoy530
Perhaps you guys can help me. I just installed my head unit and my speakers, however I'm having a hard time finding a hole in the firewall for my 2001 accord coupe 4 cyclinder. Any help (especially pics) would be really helpfull. I'd rather not drill a hole in my car.
Well what most installers do, since time is an issue, is drill thru the firewall. There are ways to do thru the firewall without drilling, but like i said, time is an issue. What I did on my 00' accord coupe was on the driver's side, drill a hole using either titanium bits or a really good brand one. Make sure the hold is just enough to slide the cable thru. btw...after you finished drilling the hole, use sand paper or a flier to smooth out the edges but if u don't, your exposing the cable to be slite open but the jagged edges. After all is that, seal the hole with a sealent like silicone. Good luck!