type r engine swap problem
#1
Registered User
Thread Starter
Join Date: May 2003
Location: regina
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
type r engine swap problem
does anyone know 98 type r engine with its engine harness plug in 95 civic cx car? i have type r engine harness and complete swap but not sure if it will fit my 95 civic cx , help please
ps i have complete 98 type r under dash wiring and other accessories, just wondering will my stock under dash wires works
ps i have complete 98 type r under dash wiring and other accessories, just wondering will my stock under dash wires works
#2
Your Powder Coater
Join Date: Mar 2004
Location: Girard, Ohio
Posts: 4,463
Likes: 0
Received 0 Likes
on
0 Posts
I'm almost positive that you would have to do a conversion but if u already have the under dash harness for the type r & all the accessories.. i'd probly just switch it all out..
I've had a wiring nightmare goin on with my lil bish lately.. some of the info is posted in here https://www.honda-acura.net/forums/s...d.php?t=141987
let this go for a lil bit & see if anyone else agrees..
I've had a wiring nightmare goin on with my lil bish lately.. some of the info is posted in here https://www.honda-acura.net/forums/s...d.php?t=141987
let this go for a lil bit & see if anyone else agrees..
#4
the OBD2 engine harness will plug into your shock tower connectors to your chassis harness. You will have to run wires from the shock tower plugs to the ecu for:
4-wire O2, vtec, knock sensor, (maybe vtec oil press, some jdm engines have this, some don't), (maybe do a 2-3 wire IACV conversion)
this is much LESS of a wiring nightmare than trying to get that thrid ecu plug on the OBD2 chassis harness wired into your chassis.
-PHiZ
4-wire O2, vtec, knock sensor, (maybe vtec oil press, some jdm engines have this, some don't), (maybe do a 2-3 wire IACV conversion)
this is much LESS of a wiring nightmare than trying to get that thrid ecu plug on the OBD2 chassis harness wired into your chassis.
-PHiZ
Thread
Thread Starter
Forum
Replies
Last Post