1990 civic dx hatch shell with goodies!!!
#1
Senior Member
Thread Starter
Join Date: Apr 2005
Location: london, ontario canada
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
1990 civic dx hatch shell with goodies!!!
Im getting rid of my old 90 hatch to make way for a crx. im taking the motor out of the civic so i can bolt on my turbo kit and slam it into a crx. And im selling my civic dirt cheap, so if you want a new project, or a parts car pick it up. Located in london, ontario, canada
comes with:
- Blitz front bumper
-buddy club rear and molded sides
-also this car is pre wired for v-tech
i had to re-wire the dx harness but its match with parts of a sir harness aswell, so if you have a sir obd0 ecu the clips are ready.
- si cluster( however i wired it up fast so the temp gauge does not work but if you check it out a little more you might be able to find out whats wrong( i will also includ the original dx cluster with indiglow guages)
- momo steering wheel with quick release hub
- si seats
- short shifter
does not have rest of interior though
- Ractive carbon fiber muffler.
- integra tail light conversion
stock integra tails and euros
-tinted windows although the passenger one is smashed due to local fags trying to steel shit.
-a little work on the floor is needed to make perfect i re welded the driver side floor but could be tunned up to look a little better.
-im only looking to get 500$ so the first 500$ takes it.
i will also arrange to trailer it to new owner for a small fee (gas)
but only to places no more then 2-3 hours away.
email me with any question @ g_madman@hotmail.com
to view my other pics go to:
http://www.cardomain.com/id/madman4you
comes with:
- Blitz front bumper
-buddy club rear and molded sides
-also this car is pre wired for v-tech
i had to re-wire the dx harness but its match with parts of a sir harness aswell, so if you have a sir obd0 ecu the clips are ready.
- si cluster( however i wired it up fast so the temp gauge does not work but if you check it out a little more you might be able to find out whats wrong( i will also includ the original dx cluster with indiglow guages)
- momo steering wheel with quick release hub
- si seats
- short shifter
does not have rest of interior though
- Ractive carbon fiber muffler.
- integra tail light conversion
stock integra tails and euros
-tinted windows although the passenger one is smashed due to local fags trying to steel shit.
-a little work on the floor is needed to make perfect i re welded the driver side floor but could be tunned up to look a little better.
-im only looking to get 500$ so the first 500$ takes it.
i will also arrange to trailer it to new owner for a small fee (gas)
but only to places no more then 2-3 hours away.
email me with any question @ g_madman@hotmail.com
to view my other pics go to:
http://www.cardomain.com/id/madman4you
#4
Senior Member
Thread Starter
Join Date: Apr 2005
Location: london, ontario canada
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
the floor just had a hole around the driveer seat so i ripped it out and re-welded some thick metal in place. if you know any one who can weld they can finish fixing it not that big of a job at all. and as fare as shipping i need you info or i can give you mine and you can find out the cheapest. iam willing to take it to the closet canadian/states border to make shipping easyer however you would have to pay a little extra for the gas because its crazy for fuil these days. so find out and let me know
#8
Senior Member
Thread Starter
Join Date: Apr 2005
Location: london, ontario canada
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
if you can just check out about me crossing the border with a car, or how much it would cost for shipping from the niagra border to your home. i prefer you to get shipping the only reason is because i am very busy and i just wont this car off my hands so the first 500 i get takes it. i prefer the transaction to be as easy for me as possible. sorry if its a problem for you.