http://www.corndesigns.com/photograp...s.php?album=21

Here's me (club officer helping me out)



here's a Porshce GT3 that came out to play!:









This time, the course setup was very tight, which wasn't good for me when I like to floor it and fly through everything. When I walked the course, I drew a map on graph paper, but I spent too much time trying to draw the course, and I didn't actually get to learn the course. My performance suffered, and I couldn't score anything better than 71.6 seconds. Most of the pros were getting high 50s. I still had fun though!!!

 

Here are pics+results from my 1st Auto-X:

http://www.corndesigns.com/photograp...s.php?album=18

http://www.tamscc.org/autoxfall03.htm (down near the bottom with last name Patel).

here's me if you don't want to browse thru (look at that body roll!):





I never looked ahead so I DNFed 3 times

 

:chuckles:

(rental)

 

GT3's aren't in superstock
both the GT2 and GT3 are not allowed in stock classes

 

yeah, our club deviates a bit too much from the SCCA classes. They aren't doing an STS class, so they threw my stock Accord (with 18s) in FSP. If I had the stock 15s I would be in HS...

 

swap out the stock's for the auto-x then

 

dad won't let me h:

 

 

doesn't want me swapping me rims around while at college. 18" Yokohama AVS ES100s go for $133 each, while 15" Sumitomo HTR 200s go for $46 each, and last longer (those would be the tires that I would use for auto-x only with my stock steelies).

 

someone needs to mow that course