350z go boom!
Nitrous doesn't kill motors....stupid people using nitrous kills motors. :chuckles:
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
Originally posted by dubster99
Assclown + too much nitrous = kaboom
Every time.
Assclown + too much nitrous = kaboom
Every time.
It's a dealership sponsored car. They were running a 375 shot out of the hole. And here's the kicker, they've already got the motor rebuilt (with forged pistons and rods this time) to take out again this weekend!
They ran an 11.38 with a 300 shot and backed it up with an 11.41. I'll let y'all know how they do this weekend as soon as I hear.
Here's they're list of other mods, and they're running a seperate fuel system for the nitrous....
Injen - CAI
XERD - Header
Tein - EDFC
NISMO- Cams
NX - Custom System
Cobra - Racing Seat
Weld - Racing Wheels
Mickey T - Drag Slicks
Line Locks
Recordable Tach
NOS Controler System
Bosch - Spark Plugs
UR - Pulley and Clutch and Flywheel
They ran an 11.38 with a 300 shot and backed it up with an 11.41. I'll let y'all know how they do this weekend as soon as I hear.
Here's they're list of other mods, and they're running a seperate fuel system for the nitrous....
Injen - CAI
XERD - Header
Tein - EDFC
NISMO- Cams
NX - Custom System
Cobra - Racing Seat
Weld - Racing Wheels
Mickey T - Drag Slicks
Line Locks
Recordable Tach
NOS Controler System
Bosch - Spark Plugs
UR - Pulley and Clutch and Flywheel
Originally posted by NorCal DC4
Nitrous doesn't kill motors....stupid people using nitrous kills motors. :chuckles:
Nitrous doesn't kill motors....stupid people using nitrous kills motors. :chuckles:
Originally posted by AKUFC
Actually they were seeing how much the motor can hold, soo your equation is incorrect, they blew that hoe on a 350 shot like whoa:
Actually they were seeing how much the motor can hold, soo your equation is incorrect, they blew that hoe on a 350 shot like whoa:
I'd say running 350 shot on a stock motor is pretty assclownish.
__________________
2015 Ford Mustang GT Fastback - Ingot Silver - 6M - Performance Package - Gibson Catback, JLT CAI, FR 47lb injectors, BAMA E85 tune, Eibach Sportline, BMR wheel hop kit, UPR oil separator, Steeda shifter bushing/bracket
Team B.O.B.® - Ballaz on a Budget
2015 Ford Mustang GT Fastback - Ingot Silver - 6M - Performance Package - Gibson Catback, JLT CAI, FR 47lb injectors, BAMA E85 tune, Eibach Sportline, BMR wheel hop kit, UPR oil separator, Steeda shifter bushing/bracket
Team B.O.B.® - Ballaz on a Budget
Hey, if they're being bankrolled by a dealer they were going to build the motor up anyway. Might as well see how quick an ET they can run with the stock block before a full build.
And now we know that a 350Z will in fact, not survive a 350 shot of nitrous.
And now we know that a 350Z will in fact, not survive a 350 shot of nitrous.
Originally posted by dubster99
I'd say running 350 shot on a stock motor is pretty assclownish.
I'd say running 350 shot on a stock motor is pretty assclownish.
This also helps show how strong the bottom end is if they were able to make a few passes at that high of a shot as well.
I hope it was at least direct port, but from the video it doesn't look like it was. If they were spraying that much on a single nozzle setup, that's assclownish too.
__________________
2015 Ford Mustang GT Fastback - Ingot Silver - 6M - Performance Package - Gibson Catback, JLT CAI, FR 47lb injectors, BAMA E85 tune, Eibach Sportline, BMR wheel hop kit, UPR oil separator, Steeda shifter bushing/bracket
Team B.O.B.® - Ballaz on a Budget
2015 Ford Mustang GT Fastback - Ingot Silver - 6M - Performance Package - Gibson Catback, JLT CAI, FR 47lb injectors, BAMA E85 tune, Eibach Sportline, BMR wheel hop kit, UPR oil separator, Steeda shifter bushing/bracket
Team B.O.B.® - Ballaz on a Budget


