i'm having a bitch of a time removing some heavily rusted bolts ... any suggestions?

 

Tried WD-40 or PB? I'm assuming that you are removing your exhaust Andrew?

 

you can soak it with penetrating fluid and let it sit for a few hours or you can grab a torch, heat the shit out of it, and crank it off.

 

you bet

i wonder if there's anything tougher than WD because i tried it ... let it soak ... and nothing ... i've done catbacks before, but these axel backs are the bolts from hell.

 

use penetrating fluid and an impact. i switch on and off...spray, impact, spray.

if that doesnt work i use a torch. torch the bolt, impact, torch, impact, spray, impact, spray, impact, torch...etc

eventually it will come loose.

last resort i pop the old cutting wheel on my Air Comp and chew it off.

 

BOOMSTICK!

 

propane torch owns you//

 

Use PB, impact, spray more PB, leave for an hour, come back, spray more, then impact and Viola .

 

i <3 yUo guys ... i've give all your suggestions a try. (except the boomstick guy, that's a last resort)

 

Hahaha...my friends told me that when I buy my exhaust, spray the bolts everyday for a week. :eh: