Damn you home depot
#1
un-Touch'd krew
Thread Starter
Damn you home depot
300 dollars you took out of my finances so I could put real wood trim around my room and I am just going to paint it anyways.
Why do I have to be such a stickler for detailsh:
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
#3
un-Touch'd krew
Thread Starter
Yeah once I get a router table I will probably be making my own trim but right now the garage is so fucked up I can't setup in there.
Front porch construction work ftl
Front porch construction work ftl
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
#5
un-Touch'd krew
Thread Starter
it's worth it to me because I hate MDF with it's soft edges, I want crisp detail in the trim work and mouldings.
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
#6
Checking it twice
Join Date: May 2002
Location: Twixt Hell/Ann Arbor MI
Posts: 13,539
Likes: 0
Received 0 Likes
on
0 Posts
So what color are fossil butts?
__________________
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming ...."WOW! What a ride!!!!!"
LUNCH with THEOLDMAN...On a break for now...
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming ...."WOW! What a ride!!!!!"
LUNCH with THEOLDMAN...On a break for now...
#10
If you were painting why not MDF?
And having a router table will not give you good trim unless you have a lot of finger boards and can feed at a consistent rate.
Either one of two things, buy hardwood moulding at a specialty shop, or buy a moulder.
And having a router table will not give you good trim unless you have a lot of finger boards and can feed at a consistent rate.
Either one of two things, buy hardwood moulding at a specialty shop, or buy a moulder.