Intalling Rear Lip
06-18-2005, 01:44 PM
#1
WHAT OK YEAH!
Thread Starter
Join Date: Sep 2003
Location: overthere
Posts: 5,565
Likes: 0
Received 0 Likes
on
0 Posts
Intalling Rear Lip
I just got a rear lip for my EG hatch, When i had my EK hatch i put a rear lip on and it melted 2 hours later 
i dont want the same to happen what do i need to do to prevent this from happening
i dont want the same to happen what do i need to do to prevent this from happening
06-18-2005, 05:12 PM
#7
AARONNOJIMA.COM
Join Date: Aug 2000
Location: Elk Grove, Ca AOL/AI
Posts: 8,559
Likes: 0
Received 0 Likes
on
0 Posts
haha gotta admit that was funny
#1 test fit everything, use masking tape and make sure it has clearance from the exhaust
#2 if close then trim at the hole and make sure there is ample clearance
#3 when mounting the lip use both strong 3m tape and more then just 2 screws at the wheel wells...depending on the lip there are different mounting holes/areas
just be careful and take precautions
#1 test fit everything, use masking tape and make sure it has clearance from the exhaust
#2 if close then trim at the hole and make sure there is ample clearance
#3 when mounting the lip use both strong 3m tape and more then just 2 screws at the wheel wells...depending on the lip there are different mounting holes/areas
just be careful and take precautions
__________________
"Dreaming is how the strong survive....."
"Am I dying to live, or living to die?"
"Dreaming is how the strong survive....."
"Am I dying to live, or living to die?"