how's this for a heat sink?
Floppy Death! noES!!!
Joined: Oct 2002
Posts: 21,218
Likes: 0
From: Scranton, PA
first things that come to mind are the height and the weight.
1) That won't fit in a typical case, so your either going to have to cut a massive hole in the side or keep the side panel off....
2) If you put that in a tower, it'll hang sideways. I wouldn't rely on the motherboard clips to hold that thing in place.
1) That won't fit in a typical case, so your either going to have to cut a massive hole in the side or keep the side panel off....
2) If you put that in a tower, it'll hang sideways. I wouldn't rely on the motherboard clips to hold that thing in place.
Grifball Player
Joined: Aug 2004
Posts: 27,249
Likes: 0
From: Foundry
Originally Posted by click sidious
first things that come to mind are the height and the weight.
1) That won't fit in a typical case, so your either going to have to cut a massive hole in the side or keep the side panel off....
2) If you put that in a tower, it'll hang sideways. I wouldn't rely on the motherboard clips to hold that thing in place.
1) That won't fit in a typical case, so your either going to have to cut a massive hole in the side or keep the side panel off....
2) If you put that in a tower, it'll hang sideways. I wouldn't rely on the motherboard clips to hold that thing in place.
It looks as if its screwed down
Floppy Death! noES!!!
Joined: Oct 2002
Posts: 21,218
Likes: 0
From: Scranton, PA
Originally Posted by Jae Jae Binks
It looks as if its screwed down
Joined: Oct 2000
Posts: 44,908
Likes: 0
From: Location Location
Originally Posted by Darth Grifter
is that a water cooler block(s)?
not just heat pipes
__________________
'00 Dakar Bus CRS Edition
LCD Squad #0001
'00 Dakar Bus CRS Edition
LCD Squad #0001
Originally Posted by WiLL
...I really wanna get out and shoot people.