for some reason i find that :rofl:

 

WOW! yeah! this place moves faster than when i was registered here before.

 

who were you before

 

Hus avatar reminds me of Coil222 for some reason

 

Okay, well, I set the drive that is connected to the end ide cable to master, and the drive connected to the ide cable in the middle to slave. I rebooted and the slave drive light is constantly on. The master works fine, but the slave won't even open when I press the button...

 

i think as long as you set one jumper to master and one to slave it should works

 

it was something like stock96civicdx or a variation of that. became a member when my gf got her 96 DX coupe, then just lost touch with the board. i just got a 03 Civic EX Sedan, so i figured i'd come back and stick around

 

try this then, slave the CD drive to the hard drive, leave your origonal one as it was.

then, reboot the computer, and read the first screens. you should be able to see what is hooked up and what is slave/master on the primary and secondary EIDE channels. also, F10 or DEL will get you into the BIOS (one or the other, maybe something else depending on your motherboard/bios). in there, you can see what is hooked up, change the boot order, etc, and see what is what.

 

i dun remember you but wb

 

the avatar came from another board. that's me in the pic, well, me except for the face. someone did an excellent photoshop job on it.