Detailing Stuff
Originally Posted by integboi220
i use klasse for my jobs. i just put together of a collection of all the different stuff i have collected. as for cost it depends on the car but off course ill give a HAN discount PM me
the nano wax worked out ok ive used it on 2 cars a red 90 integra and a 2001 silver sienna: on the integra it hid some swirls but i was pleased with the over all look and shine . and as for the sienna at first i wasn't pleased with how it looked but after some time it looked better. people have said it was hard to use but i didn't think so. it was suppose to be free but the rebate hasn't came in yet i think i better give them a call
Nano wax is the least durable wax I have tried to date.
Anyway. Here we go:
Porter Cable 7424*
2 gray pads*
2 white pads*
2 yellow pads (all TOL)*
Megs DACP*
Megs Final Inspection
Megs #9 Swirl Mark Remover*
Megs Endurance High Gloss tire treatment*
Megs #16 paste wax
Megs EXTRA all purpose cleaner
NXT Wash*
NXT Wax
QEW*
Eagle One Cleaner wax
Eagle One Spray As You Wax (I heart this stuff)*
EO Wheel and Tire cleaner*
Gunk Foaming Engine Cleaner (hardly used)
2 Viper Microfibers
5 odd-job walmart concordia microfibers
Pakshak microfibers:*
3 - 16'' x 16'' Ultra - Micro Fiber Towels
1 - 24'' x 24'' Ultra - Micro Fiber Towel
1 - 16'' x 24'' Ultra-Fine - Micro Fiber Towel
1 - 25'' x 36'' Waffle Weave Micro Fiber Towel
1 - 6.5'' x 9.5'' Ultra - Micro Fiber Mitt
A LOT - Yellow Wax/Polish Foam Applicator Pads
Blackfire kit:*
Wash
Polish
Sealant
Liquid Souveran*
ZEP Carpet Cleaner
Vynilex
3M Perfect-It II Fine cut rubbing compound*
Castrol Accuvision window treatment
EagleOne 20/20 window cleaer*
Fantastik Oxipower general purpose cleaner
Claymagic clay bar (blue)*
Clearkote Vanilla Moose
Poorboys SSR 2.5*
Poorboys EX-P*
Poorboys Natural Look (303 is better)
Wizards Quick Detailer
What have I used for my poss in his bin?
Wolfgang Polish and Sealant*
Hi-Temp leather cleaner/conditioner*
Klasse AIO*
Klasse SG*
303 Aerospace protectant*
Dewalt Rotary*
Poorboys SSR3*
4 Star sealant*
Megs #7 show car glaze
Mothers Sealer and Glaze (VM is better then both)
Eiman Fabrik Hi Intensity
Eiman Fabrik Power Wash
There are other various products but...I can't remember them all.
Anyway. Here we go:
Porter Cable 7424*
2 gray pads*
2 white pads*
2 yellow pads (all TOL)*
Megs DACP*
Megs Final Inspection
Megs #9 Swirl Mark Remover*
Megs Endurance High Gloss tire treatment*
Megs #16 paste wax
Megs EXTRA all purpose cleaner
NXT Wash*
NXT Wax
QEW*
Eagle One Cleaner wax
Eagle One Spray As You Wax (I heart this stuff)*
EO Wheel and Tire cleaner*
Gunk Foaming Engine Cleaner (hardly used)
2 Viper Microfibers
5 odd-job walmart concordia microfibers
Pakshak microfibers:*
3 - 16'' x 16'' Ultra - Micro Fiber Towels
1 - 24'' x 24'' Ultra - Micro Fiber Towel
1 - 16'' x 24'' Ultra-Fine - Micro Fiber Towel
1 - 25'' x 36'' Waffle Weave Micro Fiber Towel
1 - 6.5'' x 9.5'' Ultra - Micro Fiber Mitt
A LOT - Yellow Wax/Polish Foam Applicator Pads
Blackfire kit:*
Wash
Polish
Sealant
Liquid Souveran*
ZEP Carpet Cleaner
Vynilex
3M Perfect-It II Fine cut rubbing compound*
Castrol Accuvision window treatment
EagleOne 20/20 window cleaer*
Fantastik Oxipower general purpose cleaner
Claymagic clay bar (blue)*
Clearkote Vanilla Moose
Poorboys SSR 2.5*
Poorboys EX-P*
Poorboys Natural Look (303 is better)
Wizards Quick Detailer
What have I used for my poss in his bin?
Wolfgang Polish and Sealant*
Hi-Temp leather cleaner/conditioner*
Klasse AIO*
Klasse SG*
303 Aerospace protectant*
Dewalt Rotary*
Poorboys SSR3*
4 Star sealant*
Megs #7 show car glaze
Mothers Sealer and Glaze (VM is better then both)
Eiman Fabrik Hi Intensity
Eiman Fabrik Power Wash
There are other various products but...I can't remember them all.
Originally Posted by rich
damn...i only know how to wash, polish, and wax
h:
h:
If you add clay bar into that you can do a really good job. Personally, I'd go with clay --> wolfgang polish --> wolfgang sealant.If you can get Meguiars #16 paste (blue tin, not #26 hi-tech, #16 is nicer), then order some Clearkote Vanilla Moose and use that before applying #16. It'll look nice, bead up for 3 months + (but you'll probably apply some more after washing before then). Just don't let it haze, put #16 on a panel, and wipe it off (it hazes REALLY hard). If you go this route, you also may want to order up a light polish before the VM--a lot Poorboys SSR1. It's mild, and nice, and easy to work with by hand (linear hand motions, NO small circles--ever, ever ever ever, no, we only go in every which direction when wet sanding, and even then you use linear motions--GOT IT!? heh). #16 you can usually find at auto body supply stores.


