what does it mean when my car does this??
#12
Thread Starter
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sinthetiq
did u check the inner pad
__________________
.
.
#14
Thread Starter
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rich
glazed rotors are baaad mmmmmmkay
anyway a warped rotor wont always vibrate at all speeds...not until it gets worse.
anyway a warped rotor wont always vibrate at all speeds...not until it gets worse.
so i have glazed rotors? h: mmmmmmmm....glazed...:drool:
__________________
.
.
#16
Originally Posted by rich
glazed rotors are baaad mmmmmmkay
anyway a warped rotor wont always vibrate at all speeds...not until it gets worse.
anyway a warped rotor wont always vibrate at all speeds...not until it gets worse.
actually a glazed rotor wont vibrate at all speeds
a warped rotor will
but either way time to swap rotors or have them machined. the pads will also need to be scrubbed and the glazing removed.
__________________
'00 Dakar Bus CRS Edition
LCD Squad #0001
'00 Dakar Bus CRS Edition
LCD Squad #0001
Originally Posted by WiLL
...I really wanna get out and shoot people.
#17
Thread Starter
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MeiSoSlow
Best thing is to take off the wheel and rotor so that you can look at the pads. The wear pattern looks a little off. What are you using for pads?
__________________
.
.
#19
I believe I recommended Axxis Ultimates...
__________________
'00 Dakar Bus CRS Edition
LCD Squad #0001
'00 Dakar Bus CRS Edition
LCD Squad #0001
Originally Posted by WiLL
...I really wanna get out and shoot people.
#20
RIP Woong.
Join Date: May 2000
Location: san jose, ca
Posts: 17,284
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DakarM
actually a glazed rotor wont vibrate at all speeds
a warped rotor will
but either way time to swap rotors or have them machined. the pads will also need to be scrubbed and the glazing removed.
a warped rotor will
but either way time to swap rotors or have them machined. the pads will also need to be scrubbed and the glazing removed.
i was making another comment that the rotor is glazed also.
i've seen plenty of rotors that are warped, but dont vibrate at all speeds. 3 years of being a tire/brake shop monkey taught me that.
__________________
.
.