this is the front passenger rotor:

 

they *should be the same size as the outter one right? can i see the inner pad without jacking up the car? its hot outside, i dont want to make the trip out if i dont have to h:

 

glazed rotors are baaad mmmmmmkay

anyway a warped rotor wont always vibrate at all speeds...not until it gets worse.

 

so i have glazed rotors? h: mmmmmmmm....glazed...:drool:

 

Best thing is to take off the wheel and rotor so that you can look at the pads. The wear pattern looks a little off. What are you using for pads?

 

actually a glazed rotor wont vibrate at all speeds

a warped rotor will

but either way time to swap rotors or have them machined. the pads will also need to be scrubbed and the glazing removed.

 

i dont remember exactly. PBR? rick should know, he recommended it to me a while while ago. keep in mind, these are the OEM rotors and have been resurfaced once already.

 

New rotors.. Brembo or Rotora

 

I believe I recommended Axxis Ultimates...

 

arrgh...i know that a glazed rotor doesnt cause vibration.

i was making another comment that the rotor is glazed also.

i've seen plenty of rotors that are warped, but dont vibrate at all speeds. 3 years of being a tire/brake shop monkey taught me that.