quick question - need quick answer
Thread Starter
Still here... sorta...
Joined: Sep 2000
Posts: 17,177
Likes: 2
From: CO
quick question - need quick answer
What is the sensor on the back of the intake manifold on the driver's side on a D15B7 or D16Z6 that has a round, black cylinder on top of it about the diameter of a quarter and it has a vacuum connection to the intake manifold?
I looked on www.hondaautomotiveparts.com for it and it doesn't show it.
Help!!
I looked on www.hondaautomotiveparts.com for it and it doesn't show it.
Help!!
still alive
Joined: Sep 2002
Posts: 841
Likes: 0
From: Huntsville, AL
I can't believe you couldn't take a closer picture.
http://www.hondaautomotiveparts.com/...+%28DX%2CSI%29
Ok I believe that's the fast idle valve. Their table is really messed up.
Part number 18
http://www.hondaautomotiveparts.com/...+%28DX%2CSI%29
Ok I believe that's the fast idle valve. Their table is really messed up.
Part number 18
1991 Prelude Si 4WS
Joined: Mar 2002
Posts: 457
Likes: 0
From: Fremont, CA
it's the Evap purge solenoid.
#16 in the diagram. #18 is the gasket on the Electronic Air Control valve. #13 is the Fast Idle Vavle.
www.slhondaparts.com is usually better for looking at the diagrams and stuff. The images are better quality, have better descriptions, and use the actual Honda part numbers.
#16 in the diagram. #18 is the gasket on the Electronic Air Control valve. #13 is the Fast Idle Vavle.
www.slhondaparts.com is usually better for looking at the diagrams and stuff. The images are better quality, have better descriptions, and use the actual Honda part numbers.
:fawk: