New product ... LCA spherical bearings control kits!!
Thread Starter
Joined: May 2003
Posts: 85
Likes: 0
From: Montreal
information ...LCA spherical bearings control kits..
We are just starting production of our new product! 
Lot of people asked me about the lower control arm bushings..
well after almost 1 year of testing and design,
our total control kit wil be released shortly!
The kit will permit anybody without special skills to be able to
convert his lower control arms to full spherical bearings kit just like the pro racer teams!!
No soldering required, no expensive buy new control arm everytime..no hassle to install!
Our special design consist in a hybrid giving full camber control of the spherical bearings metal to metal performance,but using specially formulated polymer spacers for axial movements reduce spherical bearing use thus increasing its lifetime a few times !!
An it also permits the user to only change specific parts if needed..
Was tested extensivly on road for long term wear, the harshness that everyone expect from this converion is almost inexistant with our kit because of the use of our special polymer axial spacers..
The kits will be available at the start for the front, rear will soon come afterward ...
will be available for EG/DC chassis only for now.
( we are currently workign on other models too..)
rear conversion will require ITR rear lower control arms
as the non ITR LCA does not permit such conversion with our kit.
We will also amke packages with our upper solid control arm bushings wich will make your car ready for performance and fine tunning of suspension..
Lots of people have already mentionned their interest in such product and as always we will be offering to HAN members special discounts!
keep checking for news in the next few weeks
any questions? requests?
thanks for your interest!!
(we are trying to do our best to give users the most for the least $$$ while going for full quality- no compromise solutions! )!!!
Lot of people asked me about the lower control arm bushings..
well after almost 1 year of testing and design,
our total control kit wil be released shortly!
The kit will permit anybody without special skills to be able to
convert his lower control arms to full spherical bearings kit just like the pro racer teams!!
No soldering required, no expensive buy new control arm everytime..no hassle to install!
Our special design consist in a hybrid giving full camber control of the spherical bearings metal to metal performance,but using specially formulated polymer spacers for axial movements reduce spherical bearing use thus increasing its lifetime a few times !!
An it also permits the user to only change specific parts if needed..
Was tested extensivly on road for long term wear, the harshness that everyone expect from this converion is almost inexistant with our kit because of the use of our special polymer axial spacers..
The kits will be available at the start for the front, rear will soon come afterward ...
will be available for EG/DC chassis only for now.
( we are currently workign on other models too..)
rear conversion will require ITR rear lower control arms
as the non ITR LCA does not permit such conversion with our kit.
We will also amke packages with our upper solid control arm bushings wich will make your car ready for performance and fine tunning of suspension..
Lots of people have already mentionned their interest in such product and as always we will be offering to HAN members special discounts!
keep checking for news in the next few weeks
any questions? requests?
thanks for your interest!!
(we are trying to do our best to give users the most for the least $$$ while going for full quality- no compromise solutions! )!!!
Last edited by JinMTVT; Feb 21, 2004 at 07:17 AM. Reason: will add a new thread with updated info and discount info
Thread Starter
Joined: May 2003
Posts: 85
Likes: 0
From: Montreal
OMG!!!
too many things at once
I am in the process of purchasing another company
( used auto parts yard)
So i have been occupied alot lately!
The products are in production RIGHT NOW!
I hope ( ...always longer than anticipated..
)
that they will be ready for next month!
We already have half of it produced..
My estimate would be 2 weeks if everything goes correctly
( the spherical bearings are long to make, and they didn't have enough in stock for our production since we are using Metric HQ ones.. neway )
I will try and keep you guys updated in the next weeks for this
Thanks for your interest
too many things at once
I am in the process of purchasing another company
( used auto parts yard)
So i have been occupied alot lately!
The products are in production RIGHT NOW!
I hope ( ...always longer than anticipated..
)that they will be ready for next month!
We already have half of it produced..
My estimate would be 2 weeks if everything goes correctly
( the spherical bearings are long to make, and they didn't have enough in stock for our production since we are using Metric HQ ones.. neway )
I will try and keep you guys updated in the next weeks for this
Thanks for your interest
Thread Starter
Joined: May 2003
Posts: 85
Likes: 0
From: Montreal
MSchu: unfortunatly, there will be no version for this chassis yet
( would be the same product for civic 88-91 and crx too )
but we are currently way tooo busy to be working on this for now
i should post major update on products in the next week!!
keep tunned
( would be the same product for civic 88-91 and crx too )
but we are currently way tooo busy to be working on this for now
i should post major update on products in the next week!!
keep tunned
