Does anyone have a pic of DC2 JDM ITR taillights? Is there a difference in the taillights between the 94-97 spec. and the 98+ spec? Are the taillights the same as the USDM? TIA

 

98+ tails



the 94-97 tails have an orange part on the edge of the tail.

 

the 98+ spec tails still have the amber in the turn signal, but the part around the tail light that doesnt light up is a lighter red than the 94-97 spec tails. lil hard to explain. h: i'll try and find a pic.

 

heres a diagram i found off honda-tech:

 

Thanks alot guys I just found some on http://www.jdmpartz.com/noname.html

 

Does anyone know how to take out the inner taillight pieces on 4dr integras? I know how to take out the outter tails but I'm not sure how to take out my inner tails. TIA

 

Those are 94-97 tails.
Notice the orange blinkers?

98+ Had red blinkers.
I know this was stated, but apparently it didn't stick.
=]

 

i really like the Aussie/Euro-spec ITR tails:

reverse light, red brake, redish-clear turn signal

those are cooL!

 

The site says they're 94-97 JDM taillights. They supposedly do not have the reflector on the outer piece, but it's hard to tell from the pic.

 

Two pieces for each side means they're from a sedan.

That diagram SlowDB7 posted shows the main differences in the tails. '94-'97 USDM and JDM are essentially the same except for the lack of reflectors on the side of the JDM tails. That picture still has the reflectors on the side. See the things I circled here?



Those aren't on JDM '94-'97 tails.

If you look at '98-'01 tails the area around the lights themselves on the lenses is the same shade of red as the brake lights rather than darker like the '94-'97 lights. The JDM '98-'01 have the same lighter borders, no side reflectors, and amber turn signals.