19.3secFerio v.2007
Thread Starter
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
more to come:

also, got a 94 teg sedan muffler in the garage, along with a sway bar from the same car.
now I need to get a set of LCA's that'll work with the sway bar.
oem tailing arm bushings have been ordered.

also, got a 94 teg sedan muffler in the garage, along with a sway bar from the same car.
now I need to get a set of LCA's that'll work with the sway bar.
oem tailing arm bushings have been ordered.
RS*R EX-Mag or Apex-i WS II if you're going to go through the trouble of hacking off the rusted/seized stock exhaust.
__________________
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
Thread Starter
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
I was wondering if you wouldn't mind sharing your wheel and tire specs?
I'd like to know your wheel size, width and offset as well as tire brand and size.
Also, if you could share your suspension setup and drop in inches.
I like the stance of your car and was wondering what you have to achieve it.
I'd like to know your wheel size, width and offset as well as tire brand and size.
Also, if you could share your suspension setup and drop in inches.
I like the stance of your car and was wondering what you have to achieve it.
Thread Starter
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
I was wondering if you wouldn't mind sharing your wheel and tire specs?
I'd like to know your wheel size, width and offset as well as tire brand and size.
Also, if you could share your suspension setup and drop in inches.
I like the stance of your car and was wondering what you have to achieve it.
I'd like to know your wheel size, width and offset as well as tire brand and size.
Also, if you could share your suspension setup and drop in inches.
I like the stance of your car and was wondering what you have to achieve it.
when I order these rims, they had two part numbers. one had 42SMF, and the set I got said 33SMF. so maybe they're 33mm offset? :dunno:
other than that, they're 16x7
tires are good 'ol kumho ecsta ast's that are 205/40
I have no idea what the brand of springs are.
h: they're second-hand from this guy I barely knew, and they were free. they're soft.... 
when I measured the fenders of the car, I found they dropped 2.5"
since the tire size is a little smaller than OEM, they drop it down an additional half inch, taking the ride height down to 3" lower (which I verified by comparing it to a coworkers bone-stock 00 lx)
I don't think that they're +33mm, otherwise you'll be rubbing. Or you're rocking the staggered offset? :chuckles: +42mm is more like it (judging by the pics, that looks about right).
Darn it about the tire size. I can't rock 40 series. They're too thin, otherwise, I might as well say goodbye to my wheels.
Thanks for the help, I really appreciate it. :goodjob:
Darn it about the tire size. I can't rock 40 series. They're too thin, otherwise, I might as well say goodbye to my wheels.
Thanks for the help, I really appreciate it. :goodjob:
Thread Starter
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
I have no idea why they'd have two different part numbers

but either way, I just called discount tire (where I got them), and they confirmed.
-33
h:
Darn it about the tire size. I can't rock 40 series. They're too thin, otherwise, I might as well say goodbye to my wheels.
Thanks for the help, I really appreciate it. :goodjob:
Thanks for the help, I really appreciate it. :goodjob:
shit, people with 17s roll 35-series. that shit is nuts.
Last edited by 19.3secS2K; May 16, 2007 at 12:12 PM.



