installing underground neon light kit
Still Water
Joined: Aug 2004
Posts: 1,236
Likes: 0
From: San Diego
ask schmoo, hes our neon specialist 
I can't imagine it being that hard. Tap a positive wire, and find a ground for them. Drill / mount the two bars so their the actual bar isn't exposed. Hook in a rocker switch somewhere and.... Vola!
Buy a screen or somthing, Rocks will probably fly up and break the bars.
I can't imagine it being that hard. Tap a positive wire, and find a ground for them. Drill / mount the two bars so their the actual bar isn't exposed. Hook in a rocker switch somewhere and.... Vola!
Buy a screen or somthing, Rocks will probably fly up and break the bars.
Senior Member
Joined: Oct 2004
Posts: 4,270
Likes: 0
From: Texas
No DIY for a neon kit, that i'm aware of.
Take foods advice and try to hide it, a screen would help deflect rocks. Secure all wires properly, wouldn't take much to rip them down. I would use rubber or something to help absorb vibrations. Run all the wires inside too a switch, and use the fuse box & a fuse.
Take foods advice and try to hide it, a screen would help deflect rocks. Secure all wires properly, wouldn't take much to rip them down. I would use rubber or something to help absorb vibrations. Run all the wires inside too a switch, and use the fuse box & a fuse.
Boost Hungry!
Joined: Oct 2006
Posts: 427
Likes: 0
From: t-town,tx
it looks good when its done right and your not always cruising around at night with them always on....what brand? i had a streetglow gold series on one ride...very good quality and hard to break tubes
