Notices
Showroom Find you some "show" for your "go."

Need Answers (Wheels)

Thread Tools
 
Old May 23, 2005 | 04:53 PM
  #11  
cashmoney's Avatar
cashmoney
Thread Starter
Member
 
Joined: May 2005
Posts: 64
Likes: 0
Default

:irock:So most people think I should go with 17's. What I was trying to do was put 18's on and thought it would take up more space in the fender making the car look lower, but if you guys think 17's would look just as good then I will have to think about it. All the pics I have seen of accords with 17's it makes the car look like is has small rims and there is always a big gap in the fender well. I will look at some more pics and make a decision.
Reply
Old May 23, 2005 | 06:08 PM
  #12  
Provocateur's Avatar
Provocateur
On permanent hiatus
 
Joined: Jul 2004
Posts: 9,716
Likes: 0
From: A forum with actual tech
Default

17's still look pretty goofy, but not as much as 18's. You will definitely rub with 18's and you will have to roll the fenders big time to accomodate the wider tire. If you get a nice drop, 17's will have no gap but you may still need to roll the fenders.
Reply
Old May 25, 2005 | 03:53 AM
  #13  
cashmoney's Avatar
cashmoney
Thread Starter
Member
 
Joined: May 2005
Posts: 64
Likes: 0
Default

So what would you suggest then.
Reply
Old May 26, 2005 | 12:23 PM
  #14  
cashmoney's Avatar
cashmoney
Thread Starter
Member
 
Joined: May 2005
Posts: 64
Likes: 0
Default OK I Really Need To Know

Ok I need a serious answer now on what size Blitz wheels I need to put on my 97 accord se?? I have been told that 18" wheels would be too big so I am thinking of 17's now. What should I do and would 17's look to small because my car is not lowered.
Attached Images
File Type: jpg
WheelZ1.jpg (129.8 KB, 24 views)
Reply
Old May 26, 2005 | 12:46 PM
  #15  
CalBearz24's Avatar
CalBearz24
Senior Member
 
Joined: Jun 2002
Posts: 387
Likes: 0
From: SF Bay Area
Default

18s would visually make it look higher and worse than if you had 17s. the ratio of wheel gap vs tire sidewall height is greater with 18s.

can i ask why you aren't lowered? it would do more for looks with stock wheels than 17s or 18s with no drop.
Reply
Old May 26, 2005 | 01:42 PM
  #16  
cashmoney's Avatar
cashmoney
Thread Starter
Member
 
Joined: May 2005
Posts: 64
Likes: 0
Default

Well would it look good with 17's and dropped maybe 1.5"? The reason why i was skeptical on whether to lower it or not is because I am going to put a Xenon body kit on it and I thought that with a body kit and it lowered it might scrape a lot. If I put lowering springs on it and a camber kit with the 17" wheels would that be good? I like how you have your white accord set up so I am kind of going by what yours looks like. Thats why I sent you the private message. Anyway if you could help me out with this I would appreciate it.

I HAVE A PIC OF THE BODY KIT BELOW. TELL ME WHAT YOU THINK.
Attached Images
File Type: jpg
backyellow.jpg (44.7 KB, 19 views)
File Type: jpg
yellow honda.jpg (40.4 KB, 17 views)
File Type: jpg
side yellow.jpg (32.6 KB, 11 views)
Reply
Old May 26, 2005 | 01:49 PM
  #17  
ViXxXeN's Avatar
ViXxXeN
Registered User
 
Joined: May 2005
Posts: 8
Likes: 0
From: Dallas
Default

My cousin has 17's on her honda and it looks perfect. 18's ...to large and it makes your car look cheesy. Also, you will experience so many problems. Most people think "well come on 18's are 1 inch more than 17's how much worse could it be?" It's not good!
Reply
Old May 26, 2005 | 02:55 PM
  #18  
CalBearz24's Avatar
CalBearz24
Senior Member
 
Joined: Jun 2002
Posts: 387
Likes: 0
From: SF Bay Area
Default

i don't think a body kit with 17s would look good with stock height. i think you at least need to drop with pro-kits to make it look decent. as i told you in the PM, i have pro-kits with neuspeed konis and dropped roughly 1.5-1.75". i rarely scrape with this setup. if you pair the pro-kits with tokicos, bilsteins, or kyb agx's, you'll be closer to the 1.2" spec of the springs and should be good to go even with that kit.
Reply
Old May 26, 2005 | 04:48 PM
  #19  
cashmoney's Avatar
cashmoney
Thread Starter
Member
 
Joined: May 2005
Posts: 64
Likes: 0
Default

Where can you get the neuspeed konis from?
Reply
Old May 26, 2005 | 05:31 PM
  #20  
CalBearz24's Avatar
CalBearz24
Senior Member
 
Joined: Jun 2002
Posts: 387
Likes: 0
From: SF Bay Area
Default

i got mine for $525 shipped from importhorizon.com a couple of years ago. their price is higher now. you can get them for $512 shipped from seller asw88 on ebay. we bought SP3s from that seller for my sister's 98 coupe and got very good service. let's see if this ebay link works: http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
Reply



All times are GMT -8. The time now is 04:59 AM.