Suspension
#1
Member
Thread Starter
Join Date: Oct 2002
Location: Albuquerque, NM
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Suspension
I was wondering if anyone had any links showing how the suspension is setup in an rsx for the front and rear. I am getting GC coilovers, and I may have a shop put them in, but I want to see what steps need to be taken to swap out the springs before I go through the procedure.
#2
Try this site. They sell Acura parts and actually put up pics from the Helm manual to show part #'s. I don't know if this will help you or not, but it's a start.
Front sub frame
Rear Lower Arm
Front sub frame
Rear Lower Arm
#3
I did it my-self without any pre experiance on rsx's but I had done about 5 civics and a couple integra's. everything went well accept for you have to take the ball joint out of the tie rod end and that can be a pain. I wedged the end of a breaker bar in there and pried on it while I tapped on it with a hammer. It worked pretty good. allthough I did lower my friends type-s a few weeks after and his had more miles on it and so it was a little harder to get out. If you need any advise you can pm me and I will be glad to help.
late
late