Notices

check engine light / atts light

Thread Tools
 
Old Nov 10, 2002 | 01:26 PM
  #1  
epoxy's Avatar
epoxy
Thread Starter
Regulator
 
Joined: Oct 2002
Posts: 574
Likes: 0
From: wilmington, nc
Default check engine light / atts light

my 'check engine light' and 'ATTS' light are on in my 5th gen prelude...

what should i do? my friend redlined it when he dropped into a lower gear, but it was only for a breif second. the light came on like 3 minutes after it happened. i just wanted to hit 'em :madfawk:

but... everything sounds fine and the car runs just like it did before.


should i not drive it until i get it checked out or what?

any help would be VERY appreciated.
Reply
Old Nov 11, 2002 | 09:48 PM
  #2  
prelude1897's Avatar
prelude1897
Senior Member
 
Joined: Sep 2002
Posts: 581
Likes: 0
From: TX
Default

Don't freak out. Just see what code you're throwing and you can find your problem there. Try reseting your computer by taking off your negative battery wire for awhile, then put back on and start your car. If the light doesn't come back on, then you're car is fine.
Reply
Old Nov 12, 2002 | 06:52 AM
  #3  
epoxy's Avatar
epoxy
Thread Starter
Regulator
 
Joined: Oct 2002
Posts: 574
Likes: 0
From: wilmington, nc
Default

alrighty... thanks.

i'll be back when i find out what code it's throw'n
Reply
Old Nov 14, 2002 | 12:22 PM
  #4  
epoxy's Avatar
epoxy
Thread Starter
Regulator
 
Joined: Oct 2002
Posts: 574
Likes: 0
From: wilmington, nc
Default

well..i did that trick, and it went off for a day, then it randomly came on when i was driving. about to read up on how to find out the code, but i'll be back when i do.

thanks.
Reply
Old Nov 14, 2002 | 02:33 PM
  #5  
epoxy's Avatar
epoxy
Thread Starter
Regulator
 
Joined: Oct 2002
Posts: 574
Likes: 0
From: wilmington, nc
Default

heh..help me
Reply
Old Nov 14, 2002 | 02:47 PM
  #6  
prelude1897's Avatar
prelude1897
Senior Member
 
Joined: Sep 2002
Posts: 581
Likes: 0
From: TX
Default

Go to http://www.hondaprelude.to/main_checkengine.html
Reply
Old Nov 14, 2002 | 04:19 PM
  #7  
epoxy's Avatar
epoxy
Thread Starter
Regulator
 
Joined: Oct 2002
Posts: 574
Likes: 0
From: wilmington, nc
Default

PERFECT!
Reply
Old Nov 15, 2002 | 12:26 PM
  #8  
epoxy's Avatar
epoxy
Thread Starter
Regulator
 
Joined: Oct 2002
Posts: 574
Likes: 0
From: wilmington, nc
Default

alrighty... got a code 1.

code = Primary Heated Oxygen Circuit

Detection Item:
High/Low Signal

Probable cause:
Open or short in Primary HO2S sensor
Primary HO2S sensor
ECM


that's what some website said. any thing i need to know? should i keep driving my car?
Reply
Old Nov 15, 2002 | 04:14 PM
  #9  
prelude1897's Avatar
prelude1897
Senior Member
 
Joined: Sep 2002
Posts: 581
Likes: 0
From: TX
Default

You can still drive your car. You just need to either get a new O2 sensor, or check your wireing on your catalic convertor or your header
Reply




All times are GMT -8. The time now is 06:26 AM.