Notices

ATTS Horsepower Limit

Thread Tools
 
Old Jul 20, 2007 | 01:58 PM
  #1  
cyclops755's Avatar
cyclops755
Thread Starter
Member
 
Joined: Aug 2004
Posts: 77
Likes: 0
From: Wilmington, DE
Default ATTS Horsepower Limit

So I've got a 99 SH, and I was curious about the HP limit the ATTS unit can take before its rendered useless. I've heard many say 300, but I've seen a few others say it craps out at as low as 240. Also, if you go over the unit's max HP limit, is there an actual mechanical failure and the unit actually "breaks", or is it just that the ATTS unit can't function when the engine's output is about its limit, and will continue functioning normally once the engine's output drops back down to "normal" levels? I'm getting some work done to mine, and I want to add a little power, but only as much as the ATTS unit can take. If I'm gonna make the car lug the ATTS around, I might as well make sure I can use it .
Reply
Old Aug 4, 2007 | 02:56 PM
  #2  
ludasic907's Avatar
ludasic907
Junior Member
 
Joined: Aug 2007
Posts: 3
Likes: 0
From: alaska
Default

Originally Posted by cyclops755
So I've got a 99 SH, and I was curious about the HP limit the ATTS unit can take before its rendered useless. I've heard many say 300, but I've seen a few others say it craps out at as low as 240. Also, if you go over the unit's max HP limit, is there an actual mechanical failure and the unit actually "breaks", or is it just that the ATTS unit can't function when the engine's output is about its limit, and will continue functioning normally once the engine's output drops back down to "normal" levels? I'm getting some work done to mine, and I want to add a little power, but only as much as the ATTS unit can take. If I'm gonna make the car lug the ATTS around, I might as well make sure I can use it .
i'm not shure about what's the limit on atts but i have a prelude type sh and i bought a bolt on turbo kit and gaind like 300 horses and then later on down the road the atts gave up on me...so then i eneded up building a jdm h22
Reply
Old Aug 8, 2007 | 01:19 PM
  #3  
cyclops755's Avatar
cyclops755
Thread Starter
Member
 
Joined: Aug 2004
Posts: 77
Likes: 0
From: Wilmington, DE
Default

Yeah, I know most people with turbos have base models, but does anyone else on here have a turbo'd SH or know someone who does? Does your/they're ATTS still work?
Reply




All times are GMT -8. The time now is 02:09 PM.