Notices

Help! Car wont start!

Thread Tools
 
Old 11-15-2006, 09:25 AM
  #11  
Lynxx
Methanol Drinker
 
Lynxx's Avatar
 
Join Date: Jul 2006
Location: Dallas, Texas
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
Default

It still sounds like the ignition switch is at fault. You can have a bad I/S and still have spark...
Old 11-16-2006, 12:27 AM
  #12  
preludedriva
Registered User
Thread Starter
 
preludedriva's Avatar
 
Join Date: Jun 2005
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

it might be the swtich but it might be the alarm if it is then ima have circuit city fix it if anythign ima hook it up to a starter switch
Old 11-16-2006, 09:46 PM
  #13  
Nirvanaspartan
Senior Member
 
Nirvanaspartan's Avatar
 
Join Date: May 2005
Location: South California!! Baby!!
Posts: 333
Likes: 0
Received 0 Likes on 0 Posts
Default

solenoid?
Old 11-20-2006, 02:50 PM
  #14  
preludedriva
Registered User
Thread Starter
 
preludedriva's Avatar
 
Join Date: Jun 2005
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

its not the starter at all because the shop its at getting turboed jump started the starter and it fired right up
Old 12-03-2006, 01:54 AM
  #15  
numark34
Junior Member
 
numark34's Avatar
 
Join Date: Aug 2006
Location: corcoran cali
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

then it must be your battery low charge amperage or just dead
Old 12-04-2006, 09:54 PM
  #16  
stereo
Senior Member
 
stereo's Avatar
 
Join Date: Jul 2004
Location: CA
Posts: 901
Likes: 0
Received 1 Like on 1 Post
Default

it could be an ignition switch or if you have a aftermarket alarm usally code alarms are famous for causing the problem your describeing because the open circut starter kill pits the relay causeing it to fail.
Old 12-05-2006, 09:30 PM
  #17  
numark34
Junior Member
 
numark34's Avatar
 
Join Date: Aug 2006
Location: corcoran cali
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

if you think its the alarm find the control box and unplug the harness with the key switch open then plug it back in ur alarm should go off dont worry it will shut off on its own so leave it be dont use your remote the alarm will reset itself after about 15 minutes to ahalf hour then give it ago it should start back up if its your alarm i mean ur security system is at fault
Old 12-09-2006, 08:30 PM
  #18  
preludedriva
Registered User
Thread Starter
 
preludedriva's Avatar
 
Join Date: Jun 2005
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

it was the start solenoid i guess what happened was there was a short from the alarm and it shorted out the solenoid




All times are GMT -8. The time now is 03:24 AM.