What is this thing?
Thread Starter
Junior Member
Joined: Aug 2006
Posts: 7
Likes: 0
From: Toronto
What is this thing?
Can somebody please tell me what this thing is.
What is it called?
What does it do?
i followed a vacum line and it was connected to the throttle body
Thanks.
What is it called?
What does it do?
i followed a vacum line and it was connected to the throttle body
Thanks.
Last edited by h22srb; Aug 20, 2006 at 06:16 PM.
Snapping bolts
Joined: Feb 2005
Posts: 1,028
Likes: 0
From: Orange County, Ca
That's a vacum box for the stock intake butterflys. If you are installing a aftermarket intake disregard it but cover the vac lines which come from it to the intake manifold.
http://www.ntpog.org/mods/fifth-intake/butterfly.shtml
http://www.ntpog.org/mods/fifth-intake/butterfly.shtml
Last edited by Mkazm83; Aug 20, 2006 at 06:29 PM.
Member
Joined: Jun 2006
Posts: 70
Likes: 0
yeah I would just pull the entire system along with the vacuum hoses or atleast thats what I did, then just cap off the nipples on the intake manifold where you traced the vacuum lines from the box, if you cap the hoses you could be losing vacuum pressure if the vac lines have a cut or hole in them plus thats added length the air has to travel to add hg. pressure in the intake manifold.