Code 9
Thread Starter
Rachel Bilson
Joined: Oct 2005
Posts: 11,230
Likes: 0
From: South Bend/Walkerton, Ind
Code 9
Im still throwing a Code 9 on my ECU for 92 Prelude, I thought i was throwing a code 9 because my distributor was burnt out, but i put on a "new" one but i still have the same trouble code. HELP PLEASE!!!!!!
Junior Member
Joined: Sep 2005
Posts: 20
Likes: 0
From: Pennsylvania
code 9 is for a cylinder sensor. don't know if that means anything to you but you can check it out here http://www.92lude.com/self_diagnostic_codes.htm
Senior Member
Joined: Feb 2006
Posts: 291
Likes: 0
the tests are continuity tests and you will need a service manual. the code is a tdc/crank/cyl sensor circuit. if all wiring is good, and you've put a new dist. in, try changing the ecu out for a known good one.
Thread Starter
Rachel Bilson
Joined: Oct 2005
Posts: 11,230
Likes: 0
From: South Bend/Walkerton, Ind
The timing belt is fine, im gonna have to take it in and get it checked again for timing, i was also told if the injector was stuck it would also throw this code, so ill just take it in and see if its fixed.