just bought a 98 prelude [need help]
hey guys i just bought a 98 prelude and i need help on whats good to buy for it. Like modifications for the street
. I was already thinking about a CAI for the stock vtec. I was told it doesnt realy do anything if its on a stock engine. I was a body kit too but im still not sure about that...im willing to spend up to 5g if i have to. I dont care about looks i just care about whats on the inside
. PLEASE HELP
. I was already thinking about a CAI for the stock vtec. I was told it doesnt realy do anything if its on a stock engine. I was a body kit too but im still not sure about that...im willing to spend up to 5g if i have to. I dont care about looks i just care about whats on the inside
. PLEASE HELP
JR Supercharger..$3000. it will boost your cars power and torque quite nicely. It will increase the ~160 HP you get to your wheels to around 230. Wish I had the $3000, because that would be one of the first.
you have an auto. basically, any modification that you do will be worthless from a speed standpoint.
save that 5000 bucks for when you need to replace the tranny (b/c it'll eventually die), swap in a manual, and go from there.
save that 5000 bucks for when you need to replace the tranny (b/c it'll eventually die), swap in a manual, and go from there.
Originally Posted by monkey
you have an auto. basically, any modification that you do will be worthless from a speed standpoint.
save that 5000 bucks for when you need to replace the tranny (b/c it'll eventually die), swap in a manual, and go from there.
save that 5000 bucks for when you need to replace the tranny (b/c it'll eventually die), swap in a manual, and go from there.
http://www.turboneticsinc.com/ts_applications.htm
check this out this is a good kit for a stock motor without re sleeving the motor for more than 8psi
if you want to go past 8psi i heard eagle sleeves or darton sleeves are a must with new cams
if i had 5grand i would buy a motor that was built right and blow about 20psi into it
check these fags beating a viper with their civic si with a 20psi system
pretty sick shit hahaha
http://videos.streetfire.net/Player....76887B7BF4&p=0
check this out this is a good kit for a stock motor without re sleeving the motor for more than 8psi
if you want to go past 8psi i heard eagle sleeves or darton sleeves are a must with new cams
if i had 5grand i would buy a motor that was built right and blow about 20psi into it
check these fags beating a viper with their civic si with a 20psi system
pretty sick shit hahaha
http://videos.streetfire.net/Player....76887B7BF4&p=0


