ive got a 92 prelude s, and i was wondering if it would be worth getting the JDM vtec model brakes for it,
the guy offered me the calipers, brakets and rotors for $150
would you get em?
thanx
-Charlie

 

I don't know if they will fit without replacing your whole hub/bearing assembly..... if I'm not mistaken, S models had 4 bolt hubs and Si and VTEC models are 5 bolt. You better double check that.

 

it depends on if it's a 5th gen vtec or a 4th gen, since i believe the 4th gen vtec had a 4x114.3 lug pattern. i'm not sure if the bracket will fit on the knuckle/hub but for $150 bucks it sounds like a pretty good deal. you could probably find a way to make it work...

 

I know all 4th gen Si and ALL VTEC MODELS have 5 lug hubs.

 

hmm, are you sure about that?

i'll check around.

 

you sir are incorrect. my friends 96 SI has 4 bolt blade rims- its common for 5th accord owners to swap the Si rims from the 4th gen lude.. and ALL 5th gen accords= 4 lugs.

VTEC models = 4 lug

 

Once I had to replace the rear wheel bearings and the guy mistakenly ordered a 96 vtec bearing, and it's 5-lug.

Mine is a SI, and it has 4 lugs. So yeah vtecs are 5 lugs.

 

you guys who say 5 lug are on crack.. lol

ALL 4th gen preludes = 4x114.3

 

I stand corrected. Only 5th gen have five bolts.