Help Installing Rear Lower Tie Bar
Thread Starter
Member
Joined: Oct 2003
Posts: 27
Likes: 0
From: Colorado
Help Installing Rear Lower Tie Bar
I just got a DC REAR LOWER TIE BAR for my 01 Prelude, and i can't figure out exactly where to install it, so if anyone with a 92-01 prelude or 90-97 accord has one, please tell me where exactly you installed it, or better yet, anyone with one, post a close up pic, and i will get it from there. thanks for the help
Senior Member
Joined: May 2003
Posts: 1,052
Likes: 0
From: Long Island, NY
yah i have one
there are 2 bolts, one on each side where the lower control arms are bolted to the rear cross beam
the tricky part is that the bolts you want to connect to are not facing down, they are facing the rear of the car, you should be able to see the rear crossbeam from looking under the rear bumper, and you should see a bolt at each end facing at you, its actually a nut, take the nut off and pop the bar on, then retighten, i recommend around 48 ft/lbs
~boom
there are 2 bolts, one on each side where the lower control arms are bolted to the rear cross beam
the tricky part is that the bolts you want to connect to are not facing down, they are facing the rear of the car, you should be able to see the rear crossbeam from looking under the rear bumper, and you should see a bolt at each end facing at you, its actually a nut, take the nut off and pop the bar on, then retighten, i recommend around 48 ft/lbs
~boom