Does anyone know how to clear out the turn signals in the front of a 5th generation prelude?

 

The only way I know is to buy some clear bumper lenses. I'm not sure who makes them, probably APC or someone like that. They will probably run you about $50. Then get the clear bulbs. I have clear lenses, but I put the amber bulbs in. It looks clear until you signal.

 

how did you clear yours out?

 

are you tlaking about the front turns or the side driving lights??

 

im talkin bout the front turn signals right under the head lights

 

So am I....I was able to take the front lenses off with a flat head screw driver, then I glued them back together

 

it took my five mintues to clear it out - I took the thing out and broke apart the orange cube with needle nose pilers, i pulled it out piece by piece- it works great. If you take the whole thing apart then re glue it it takes 8 times as long plus u can run into condensation problems.

 

i bought my front clear turn signals for $15 +plus shipping off of eBay

 

why em? its takes 5 minutes to do it urself and its free:thumbup:

 

yea im just going to do it my self by breaking it, and then pulling out the orange peices.

no condensation problems then!