h22a head power limits?
Thread Starter
Junior Member
Joined: Nov 2003
Posts: 7
Likes: 0
From: Maryland
h22a head power limits?
at what point do the h22a head have to be built?
am building my block for the 450+whp.
i can't afford to upgrade the head now because of all the money i have put in the block.i just want to know so when am on the dyno
i don't go over the power limit.
am building my block for the 450+whp.
i can't afford to upgrade the head now because of all the money i have put in the block.i just want to know so when am on the dyno
i don't go over the power limit.
Junior Member
Joined: Sep 2003
Posts: 13
Likes: 0
From: Columbus, Ohio - 614
how do you figure 450+ whp without modding the head? your gonna need more air in the engine for that amount of power.
whats your build consist of? i'm interested in what all you've done
whats your build consist of? i'm interested in what all you've done
Thread Starter
Junior Member
Joined: Nov 2003
Posts: 7
Likes: 0
From: Maryland
Well the block is a closed deck motor with darton replacement flanged sleeves.JE 9:1 pistons with engin set,Eagle rods,arp bolts
micropolished crankshaft,new oil squrters,walbro 255lph high pressure intank pump,aem adjustable fpr,aem adjustable cam gears,aem fuel rail,msd digital 6 plus,act clutch set,h23 tranny,gutted cat,greddy evo catback exhaust,eibach proline springs,rear camber kit,revhard t3/t4oe turbo with a .63 compressor wheel and a .57 exhaust,revhard manifold,external deltagateIII dump to the air,pwr 31x11x3 intercooler,rfl bov,3bar map sensor,hondata s200,nitto 450 215/35zr/18.thats all i have so far so what do you think?i saw on ebay crower springs and retainers were being sold for 300.00 but i never bought anything off ebay so i don't trust that.
micropolished crankshaft,new oil squrters,walbro 255lph high pressure intank pump,aem adjustable fpr,aem adjustable cam gears,aem fuel rail,msd digital 6 plus,act clutch set,h23 tranny,gutted cat,greddy evo catback exhaust,eibach proline springs,rear camber kit,revhard t3/t4oe turbo with a .63 compressor wheel and a .57 exhaust,revhard manifold,external deltagateIII dump to the air,pwr 31x11x3 intercooler,rfl bov,3bar map sensor,hondata s200,nitto 450 215/35zr/18.thats all i have so far so what do you think?i saw on ebay crower springs and retainers were being sold for 300.00 but i never bought anything off ebay so i don't trust that.