Notices

s2000 steering wheel

Thread Tools
 
Old Nov 10, 2003 | 04:01 PM
  #1  
Prelude00Red's Avatar
Prelude00Red
Thread Starter
Registered User
 
Joined: May 2003
Posts: 133
Likes: 0
From: VA
Default s2000 steering wheel

does anyones know for a 100% that the s2000 steering wheel will fit on the 5th generation prelude???

cause i want that instead of momo, but if not ill have to go w/ the momo.
Reply
Old Nov 10, 2003 | 10:19 PM
  #2  
92lx
Guest
 
Posts: n/a
Default

I know that it'll fit the 5th Gen Accord, and I believe the prelude wheel will fit the 5th gen Accord....so I don't see why not, however, get it, and if it doesn't fit, you can always sell it. I will probably eat my words on this - but you probably will have a hard time finding someone who's done this before - because that wheel is not cheap at all, by any standard.

- Nathan
Reply
Old Nov 11, 2003 | 07:25 PM
  #3  
nbn22385's Avatar
nbn22385
Junior Member
 
Joined: Apr 2003
Posts: 19
Likes: 0
Default Re: s2000 steering wheel

Originally posted by Prelude00Red
does anyones know for a 100% that the s2000 steering wheel will fit on the 5th generation prelude???

cause i want that instead of momo, but if not ill have to go w/ the momo.
100% sure.
Install: http://www.ntpog.org/mods/fifth-s2kwheel/index.shtml
Reply
Old Nov 13, 2003 | 10:36 AM
  #4  
batmanlude's Avatar
batmanlude
Senior Member
 
Joined: Jun 2003
Posts: 469
Likes: 0
From: Chicago
Default

Where is the best place to get one?
Reply
Old Nov 13, 2003 | 12:25 PM
  #5  
GSuperR's Avatar
GSuperR
High revving V8 FTW!!!
 
Joined: Feb 1999
Posts: 982
Likes: 0
From: SoCal
Default

Originally posted by batmanlude
Where is the best place to get one?

ebay
Reply
Old Nov 13, 2003 | 03:49 PM
  #6  
nbn22385's Avatar
nbn22385
Junior Member
 
Joined: Apr 2003
Posts: 19
Likes: 0
Default

Originally posted by batmanlude
Where is the best place to get one?
you can also try a s2000 site like www.s2ki.com and post a WTB thread, they are always switching to momo wheels and stuff.
Reply
Old Nov 15, 2003 | 03:58 PM
  #7  
hk29's Avatar
hk29
Member
 
Joined: Jun 2002
Posts: 52
Likes: 0
Default

that sure does seem like a lot of work
Reply
Old Nov 16, 2003 | 09:02 PM
  #8  
epoxy's Avatar
epoxy
Regulator
 
Joined: Oct 2002
Posts: 574
Likes: 0
From: wilmington, nc
Default

it's not that bad. the big thing to remember is that if you have a SH, you'll need an extra groove in it. you'll see what i mean in thr write up. i'm pretty sure it's in there.
Reply




All times are GMT -8. The time now is 11:16 AM.