'00 Prelude + 17X7 5-spoke TSX rims + Brembo?
#1
mini Ferarri
Thread Starter
Join Date: Jul 2002
Location: Central FL
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
'00 Prelude + 17X7 5-spoke TSX rims + Brembo?
Hello,
I am seriously considering purchasing a set of 5-spoke (gunmetal 17x7) TSX option wheels for my Honda Prelude SH.
I'm also interested in fitting a set of Brembo brakes at a later time and I'd like an opinion on fitment.
Both my stock SH rims and the TSX rims share the same +55mm offset. The size differences are 16x6.5" vs. 17x7".
Will I be able to fit Brembos with these wheels? With -5mm spacers?
Thanks!
-Craig
I am seriously considering purchasing a set of 5-spoke (gunmetal 17x7) TSX option wheels for my Honda Prelude SH.
I'm also interested in fitting a set of Brembo brakes at a later time and I'd like an opinion on fitment.
Both my stock SH rims and the TSX rims share the same +55mm offset. The size differences are 16x6.5" vs. 17x7".
Will I be able to fit Brembos with these wheels? With -5mm spacers?
Thanks!
-Craig
#2
a brembo big brake kit? not sure you're gonna have to look at the fitment schematics and figure that out for yourself. i'm guessing that wheel will fit a rotora kit, but i'm not sure about the brembo.
#5
mini Ferarri
Thread Starter
Join Date: Jul 2002
Location: Central FL
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Heightwise, the calipers will clear for sure (on the TSX rims). It is the thickness of the Brembo calipers that bother me with these wheels.
From the Brembo schematic I measured a necessarry 7/8" clearance from the bell to the spokes of the wheel. On the opposite side of the caliper it's about the same.
I'll have to buy a single wheel and make sure once it's test fitted on the car.
Thanks Monkey!
-Craig
From the Brembo schematic I measured a necessarry 7/8" clearance from the bell to the spokes of the wheel. On the opposite side of the caliper it's about the same.
I'll have to buy a single wheel and make sure once it's test fitted on the car.
Thanks Monkey!
-Craig