*Custom Turbo Manifolds and Intercooler Piping*
#1
Junior Member
Thread Starter
Join Date: Jun 2003
Location: Greensboro, NC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
*Custom Turbo Manifolds and Intercooler Piping*
I build custom Turbo manifolds and Intercooler piping for virtually any Honda application, with a lifetime warranty against cracking on all parts. Any turbo, wastegate and bov setup can be accommodated, and prices start at 250 for manifolds, and 175 for a full piping kit.
I have lots of references on Honda-Tech.com and Team-Integra.net, and my website will be up and running shortly.
IM or Email me at John@davidenglish.com for questions or pricing.
-John
I have lots of references on Honda-Tech.com and Team-Integra.net, and my website will be up and running shortly.
IM or Email me at John@davidenglish.com for questions or pricing.
-John
#3
Junior Member
Thread Starter
Join Date: Jun 2003
Location: Greensboro, NC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Greensboro, North Carolina. However, I'll be moving to Massachusetts at the end of August.
Shipping though UPS is generally pretty inexpensive, though
Shipping though UPS is generally pretty inexpensive, though
#4
I'm intrested in a Turbo manifold with a T3 flange and external wastegate flange for an F22B1 and charge piping for a fourth gen Accord. The F22B1 is in my forth gen.
I would need a price quote including shipping to Miami, FL 33183.
Thank you.
I would need a price quote including shipping to Miami, FL 33183.
Thank you.
#6
Junior Member
Thread Starter
Join Date: Jun 2003
Location: Greensboro, NC
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
BustedLX: Accord IC piping generally requires some funky bends, so it would run about 225 shipped to your location. Email me with that size and location intercooler you'll be running, what BOV your going to use and where you want it.
The manifold will be $275 for a stainless steel log style, a/c compatible manifold flanged for a T3 and Deltagate/Tial wastegate. I can do an equal length unit, and that will run around $400.
TheOnlyChrisB: Pick up is fine, I'll be in Amherst. However, I'm not going to be readily available until the beginning of September. If that suits your timeframe, though, all the better! Email me with what you're looking for, and when you'll need it.
-John
The manifold will be $275 for a stainless steel log style, a/c compatible manifold flanged for a T3 and Deltagate/Tial wastegate. I can do an equal length unit, and that will run around $400.
TheOnlyChrisB: Pick up is fine, I'll be in Amherst. However, I'm not going to be readily available until the beginning of September. If that suits your timeframe, though, all the better! Email me with what you're looking for, and when you'll need it.
-John
#7
man i need a turbo manifold for my 1990 acura integra i will be runnin a garret t2 t3 turbo with 1g tsi bov side mount of 2g eclipse gsx i need all 2.5 piping for this and the manifold send me a price with shipping to des moines iowa