FS: 92 Civic hatch
Whats up? I have a 92 Civic CX\VX hatch. It has a clean title. Below is what it has
Stock 1.5 motor runs but 2nd gear is bad in tranny
Full GSR suspension and brakes w\SS lines and new calipers and powerslot rotors
95 SI brake power booster and master cylinder(new)
Apexi NI catback
Eibach drag launch springs
KYB AGX adjustibles all around
Skunk2 front camber kit
progress rear camber kit
Skunk2 front and rear upper stru bars
ST rear swaybar and lower tiebar combo
Prothane bushings(everywhere, includes tariling arm bushing)
New wheel bearings all around
Comp engineering traction control system.
New SI E-brake cables for GSR rear discs
Skunk2 wheel studs and lugnuts
All parts installed, but never been used. Car is still on jackstands if sold it will most likely be on stock steel wheels.
Now for what it needs-
front bumper
fenders
it will need a majority of the interior
battery
It was side swiped but never claimed so the passenger side door moulding will need to be pulled out. I had the frame checked and it is straight.
If interested let me know and send me an offer.
Located in OC CA. Buyer responsible for transport.
949-635-0880
dylin@melissadata.com
Dylin
Stock 1.5 motor runs but 2nd gear is bad in tranny
Full GSR suspension and brakes w\SS lines and new calipers and powerslot rotors
95 SI brake power booster and master cylinder(new)
Apexi NI catback
Eibach drag launch springs
KYB AGX adjustibles all around
Skunk2 front camber kit
progress rear camber kit
Skunk2 front and rear upper stru bars
ST rear swaybar and lower tiebar combo
Prothane bushings(everywhere, includes tariling arm bushing)
New wheel bearings all around
Comp engineering traction control system.
New SI E-brake cables for GSR rear discs
Skunk2 wheel studs and lugnuts
All parts installed, but never been used. Car is still on jackstands if sold it will most likely be on stock steel wheels.
Now for what it needs-
front bumper
fenders
it will need a majority of the interior
battery
It was side swiped but never claimed so the passenger side door moulding will need to be pulled out. I had the frame checked and it is straight.
If interested let me know and send me an offer.
Located in OC CA. Buyer responsible for transport.
949-635-0880
dylin@melissadata.com
Dylin


