FS - 98 Integra GS-R Internals
Thread Starter
Former Senior Member
Joined: May 2002
Posts: 391
Likes: 0
From: Oakland
FS - 98 Integra GS-R Internals
Hi there folks!
I've been with HAN for years, but since moving back to California and its Draconian SMOG laws lost all interest in modifying my Integra. As such, I have an extra engine completely disassembled sitting in a shed at my parents' place. Unfortunately the block itself was damaged (collapse in the casting for the oil galley and damage to aluminum on one of the cylinders) in shipping, but everything else is in good shape.
I have the stock crank, an OBD-I oilpump, all of the bearing caps and engine support brackets, harmonic balancer, and all of the head components.
The bolt holes on the exhaust side of the head were drilled out and had helicoil inserts installed to support the weight of my turbo manifold. Otherwise it's in stock condition.
I also have a set of USDM pistons and rods and a set of Eagle H-beam rods attached to Wiseco turbo pistons.
If you're interested in anything, let me know and we can discuss the price. As it's just taking up space right now, I'll let most of the stuff go cheap.
I've been with HAN for years, but since moving back to California and its Draconian SMOG laws lost all interest in modifying my Integra. As such, I have an extra engine completely disassembled sitting in a shed at my parents' place. Unfortunately the block itself was damaged (collapse in the casting for the oil galley and damage to aluminum on one of the cylinders) in shipping, but everything else is in good shape.
I have the stock crank, an OBD-I oilpump, all of the bearing caps and engine support brackets, harmonic balancer, and all of the head components.
The bolt holes on the exhaust side of the head were drilled out and had helicoil inserts installed to support the weight of my turbo manifold. Otherwise it's in stock condition.
I also have a set of USDM pistons and rods and a set of Eagle H-beam rods attached to Wiseco turbo pistons.
If you're interested in anything, let me know and we can discuss the price. As it's just taking up space right now, I'll let most of the stuff go cheap.
