"Wastegate Bumper Exit" Kits
Thread Starter
Registered User
Joined: Aug 2005
Posts: 6
Likes: 0
"Wastegate Bumper Exit" Kits
I still don't know what to call them. They are about 1/3 rice, 1/3 race, 1/3 hotrod. Price for you guys is $115.
http://tinyurl.com/astm9
This is (1) Jay Racing FWD1-(L,R)K Wastegate Dump Kit. The pictures pretty much say it all.
This kit contains everything needed to route your wastegate outlet to the bumper of your car. This is the flames shaped kit. Complete 304 stainless steel construction, these components will never rust. The outer plate comes fully polished. This is a universal kit containing 4 feet of flexible stainless tubing to fit 1½" OD wastegate outlet tube. All SS hardware is included, along with Nomex (think fire suits) insulation material.
* Kit Contents:
* * 304SS Outer flange - Flames design
* * 304SS Inner flange
* * Inner nomex insulator
* * Outer nomex insulator - Flames design
* * M6 1.25 x 20 SS BHCS (4)
* * 304SS 1 1/2" SS flex tubing (4')
* * 1 1/2" Exhaust clamps (2)
* * Mirror polishing
* * Laser engraving
This item will fit HKS STD 40mm wastegates, Tial 38mm, 40 mm, and 44mm wastegate, Turbonetics waste gate, and even the knock off waste gates (possibly some dumping internal wastegates too). These will work on Honda, Mitsubishi, Nissan, Toyota, etc. Universal kits for any turbocharged vehicle, Holset, Garrett, Precision, and of the GT turbos, any turbo. Installation will involve cutting the old outlet pipe, clamping and routing the flexible tube, and mounting & securing the decorative "flames" plate. It should not take longer than 30 minutes. Be the first in your area to have one of these babies.
These are designed for a specific side of the vehicle, so please specify which side you want.
A higher volume of these will be available soon, including a rectangular and round style. If you would like more information on these please send an email to sales@jayracing.com or keep checking http://www.jayracing.com for updates.
http://tinyurl.com/astm9
http://tinyurl.com/astm9
This is (1) Jay Racing FWD1-(L,R)K Wastegate Dump Kit. The pictures pretty much say it all.
This kit contains everything needed to route your wastegate outlet to the bumper of your car. This is the flames shaped kit. Complete 304 stainless steel construction, these components will never rust. The outer plate comes fully polished. This is a universal kit containing 4 feet of flexible stainless tubing to fit 1½" OD wastegate outlet tube. All SS hardware is included, along with Nomex (think fire suits) insulation material.
* Kit Contents:
* * 304SS Outer flange - Flames design
* * 304SS Inner flange
* * Inner nomex insulator
* * Outer nomex insulator - Flames design
* * M6 1.25 x 20 SS BHCS (4)
* * 304SS 1 1/2" SS flex tubing (4')
* * 1 1/2" Exhaust clamps (2)
* * Mirror polishing
* * Laser engraving
This item will fit HKS STD 40mm wastegates, Tial 38mm, 40 mm, and 44mm wastegate, Turbonetics waste gate, and even the knock off waste gates (possibly some dumping internal wastegates too). These will work on Honda, Mitsubishi, Nissan, Toyota, etc. Universal kits for any turbocharged vehicle, Holset, Garrett, Precision, and of the GT turbos, any turbo. Installation will involve cutting the old outlet pipe, clamping and routing the flexible tube, and mounting & securing the decorative "flames" plate. It should not take longer than 30 minutes. Be the first in your area to have one of these babies.
These are designed for a specific side of the vehicle, so please specify which side you want.
A higher volume of these will be available soon, including a rectangular and round style. If you would like more information on these please send an email to sales@jayracing.com or keep checking http://www.jayracing.com for updates.
http://tinyurl.com/astm9