FS: B-series, B18 engine mounts/brackets, AEM, ARP, Defi, GReddy
07-05-2005, 09:10 AM
#1
Member
Thread Starter
Join Date: Jul 2002
Location: Bloomington, IN
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
FS: B-series, B18 engine mounts/brackets, AEM, ARP, Defi, GReddy
Engine Parts
-------------------------------------------------------------------------------------
(2pr) B-series VTEC PR3 Cam Gears - $15 shipped/pair
(10) '96-'98 Acura TL Intake Manifold Studs [M8x1.25x50mm] - $8 shipped
.installed, never run, otherwise brand new
(8) GS-R Intake (ITR Exhaust) Inner/Outer Valve Springs - $35 shipped
(1) B-series Timing Belt Tensioner & Bolt - $15 shipped
.used
(1) B-series Rear Main Cover & Seal - $20 shipped
.new seal installed
(8) B-series AT Flexplate Bolts - $15 shipped
(1) '95 Integra GS-R OEM Oil Cooler - $70 shipped
.included: (2) hoses, (4) clamps, (1) through bolt, and (1) o-ring
.good condition
.96k miles
(1) '98 Integra GS-R Main Water Pipe - $15 shipped
.compatible with '98 to '01 GS-R's
(1) OBD-1 P72 Main Water Pipe - $15 shipped
(1) OBD-1 P72 Thermostat Housing - $15 shipped
.from my '95 Integra GS-R
.compatible with '94 to '95 GS-R's
.sold as is seen in picture
.does not include the thermostat cover, thermostat, (2) M6 bolts, or the fan thermoswitch
(1) '95 Integra GS-R Rear Tranny Mount - $15
.slight tear
.part number: 50810-ST7-000
(1) '95 Integra GS-R AC Bracket - $40
.part number: 38930-P72-000
(1) '95 Integra GS-R Upper Tranny Mount - $30
.part number: 50805-SR3-900
(1) '95 Integra GS-R Upper Engine Mount - $40
.part number: 50820-ST7-003
(1) '95 JDM GS-R RHD Engine Wiring Harness - $45 shipped
(1) ITR Crankshaft - $250 shipped
.balanced, oil holes chamfered, journals micropolished
(1) GS-R Crankshaft - $50 shipped
.#1 rod journal needs to be ground to .010" undersized or polished even more
.other journals need to be polished since surface oxidation has formed since the last time I checked it
(4) GS-R Conrods w/ PCTX .25OS Pistons & Piston Rings - $150 shipped
(3) GS-R Conrods - $25 shipped for all three
.97k miles
.all are #3 big-ends
.544g, 546g, 546g
(1) '95 GS-R Differential - $45 shipped
.4.400 final drive ring gear not included
.(10 final drive ring gear bolts not included
.VSS Ring Gear not included
(1) OBD-1 GS-R Lower Timing Belt Cover - $20 shipped
(1) 2.5" Test Pipe - $25 shipped
.2-bolt flange IN / 3-bolt flange OUT
.17" length
.gaskets included
(1) 2.5" Race Pipe [DC2's ONLY] - $85 shipped
.fits: bolts onto DC2 Integra ('94-'01) with JDM ITR header [2.5" collector]
.costs: JHPUSA 2.5" Collector Flange ($25), 3ft of Kteller 2.5" Stainless Steel Piping ($41), Borla 2.5" Stainless Steel Turn-Down ($52), and welding/hanger ($30)
.used a couple times
(1) ITR Cat-back Exhaust w/ Hytech Twin-loop Muffler - $300
.no 2nd resonator
.SMSP Stainless Steel 2.5" transition to cat (to use a 2.5" OUT cat)
.2.5" from the axle back
.it's probably gonna be a pick-up only piece since it's all one piece
(1) SMSP Carsound 2.5" 94066 Catalytic Converter - $145 shipped
.good condition
.used for maybe 8k miles
(1) Perma-cool Sandwich Plate Adapter [M20x1.5] - $15 shipped
.part number:
.used
.requires modification to work with a Honda
(1) AEM Fuel Filter [blue] - $90 shipped
.part number: AVM-25-200B
.replaceable filter element
(1) '95 GS-R Power Steering Pump - $35 shipped
(2) ITR PCV Joint Tube - $5 shipped each
.both unused, one is NIB
(1) OEM Honda '94-'01 Integra Paper Filter - $7 shipped
.slightly used and still good for another 10k miles or so
(1) OEM Honda Block Heater - $25 shipped
.used a couple of times last winter, otherwise new
(1) B18C1 Oil Dipstick - $10 shipped
(1) Defi 60mm BF Boost Gauge [NIB] - $185 shipped
.Open package and the gauge was removed for a test-fit/troubleshoot, and that's all.
(1) LS Fuel Feed Line - $50 shipped
.open package, othewise good as new
(1) OBD-1 P72 ECU - $95 shipped
.from a '95 GS-R
.failed #2 cylinder injector driver
AN Fittings & Adapters
-------------------------------------------------------------------------------------
(1) 1/2" NPT to 1/8" NPT Pipe Bushing [aluminum] - $5
.part number: FCM-2141
.retails for $7.99 @ Summit Racing
.new
(1) Accusump Check Valve - $15 shipped
.new, unused
(1) Earl's 1/8" NPT female coupler - $4
.part number: EAR-991001
.NIB
(1) Earl's -10AN to 1/2" NPT Tee on the Run Adapter - $10 shipped
.part number: 982610
.like new, unused
(2) Aeroquip 3/8" NPT to -10AN Flare Adapter [aluminum] - $4 each
.part number: FCM2185
.available at Summit Racing for $6.95
.one new, one used
(6ft) -4AN Nitrous Line - $25 shipped
(1) Autometer 1.5ft -4AN Braided Line - $20 shipped
(1) Aeroquip 3/8" NPT to -4AN Flare Steel Adapter - $3
Other Misc. Parts
------------------------------------------------------------------------------------
(13) Acura CL Open-Ended M12x1.5 Lug Nuts - $20 shipped
(1) '95 Integra Front Lug Stud
.free replacements for whomever has broken any of their's
(8) '95 Integra Rear Lug Studs - make an offer for all or any
.slightly longer than the front lug studs
(1pr) '01 Integra LS Front Shocks - $25 shipped
.sold as is shown in the picture
(2) '95 Integra Front Shock Dust Covers [metal] - $15 shipped
(1) EM Racing DC2 Rear Trunk Bar - $100 shipped
.new and unused
.includes mounting hardware
(1) Integra GS-R ECU Guard Plate - $10 shipped
(1) '95 Integra GS-R Cloth Rear Seats & Trunk Carpet [blk] - $50 + S&H
.good condition
.96k miles
(1) ZIF Socket - $5 shipped
.purchased from moates.net for $10
.high profile (blk)
(2) Rear Wiper Motors - $10 shipped each
(1) Wedge Seat Bracket - $85 shipped
.'94-'01 Integra Driver-side
.new and unused
(1pr) SRR DC2/EG Rear Adj Toe Arms - $80 shipped
.NIB
(1) Integra Spare Tire - $35 shipped
.4x100 lug pattern
.from my '95 GS-R
(2) Tein Standard 14 kg/mm Spring - $75 shipped
.used for about a year total since I don't use the Tein's in the winter season
(2) Tein Standard 16 kg/mm Spring - $75 shipped
.I ordered them and they were too much for me
.used not very much
Tools
-------------------------------------------------------------------------------------
(1 set) Generic Flex-joint Sockets - $15 shipped
.includes: 9mm, 10mm, 11mm, 13mm, 15mm, 17mm, 19mm
(1) Earl's AN Fitting Pressure Test Kit - $80 shipped
.part number:
.includes -3AN to -12AN
.never used
(1) Moroso 81.5mm Piston Installation Ring - $20 shipped
.part number: MOR-61902
.never used
.Summit price: $34.99
(1) Mitutoyo Depth Micrometer Set - $200 shipped
(1) Valve Lapping Tool - $5 shipped
(1) Sears Craftsman Beam-type Torque Wrench - $20 shipped
.0 to 75 lb*ft range
.never used
(1) Sears Craftsman Dial-Back Adjustable Timing Gun - $35 shipped
Books
-------------------------------------------------------------------------------------
(1) Race Car Aerodynamics (Designing for Speed) - $20 shipped
.author: Joseph Katz
PM me here, IM me at bchang378, or e-mail me at in_vtec@yahoo.com for questions or more pics.
I'm sure I'll dig up parts here and there as I go, so stuff changes all the time as I no longer find a use for them.
Ben
-------------------------------------------------------------------------------------
(2pr) B-series VTEC PR3 Cam Gears - $15 shipped/pair
(10) '96-'98 Acura TL Intake Manifold Studs [M8x1.25x50mm] - $8 shipped
.installed, never run, otherwise brand new
(8) GS-R Intake (ITR Exhaust) Inner/Outer Valve Springs - $35 shipped
(1) B-series Timing Belt Tensioner & Bolt - $15 shipped
.used
(1) B-series Rear Main Cover & Seal - $20 shipped
.new seal installed
(8) B-series AT Flexplate Bolts - $15 shipped
(1) '95 Integra GS-R OEM Oil Cooler - $70 shipped
.included: (2) hoses, (4) clamps, (1) through bolt, and (1) o-ring
.good condition
.96k miles
(1) '98 Integra GS-R Main Water Pipe - $15 shipped
.compatible with '98 to '01 GS-R's
(1) OBD-1 P72 Main Water Pipe - $15 shipped
(1) OBD-1 P72 Thermostat Housing - $15 shipped
.from my '95 Integra GS-R
.compatible with '94 to '95 GS-R's
.sold as is seen in picture
.does not include the thermostat cover, thermostat, (2) M6 bolts, or the fan thermoswitch
(1) '95 Integra GS-R Rear Tranny Mount - $15
.slight tear
.part number: 50810-ST7-000
(1) '95 Integra GS-R AC Bracket - $40
.part number: 38930-P72-000
(1) '95 Integra GS-R Upper Tranny Mount - $30
.part number: 50805-SR3-900
(1) '95 Integra GS-R Upper Engine Mount - $40
.part number: 50820-ST7-003
(1) '95 JDM GS-R RHD Engine Wiring Harness - $45 shipped
(1) ITR Crankshaft - $250 shipped
.balanced, oil holes chamfered, journals micropolished
(1) GS-R Crankshaft - $50 shipped
.#1 rod journal needs to be ground to .010" undersized or polished even more
.other journals need to be polished since surface oxidation has formed since the last time I checked it
(4) GS-R Conrods w/ PCTX .25OS Pistons & Piston Rings - $150 shipped
(3) GS-R Conrods - $25 shipped for all three
.97k miles
.all are #3 big-ends
.544g, 546g, 546g
(1) '95 GS-R Differential - $45 shipped
.4.400 final drive ring gear not included
.(10 final drive ring gear bolts not included
.VSS Ring Gear not included
(1) OBD-1 GS-R Lower Timing Belt Cover - $20 shipped
(1) 2.5" Test Pipe - $25 shipped
.2-bolt flange IN / 3-bolt flange OUT
.17" length
.gaskets included
(1) 2.5" Race Pipe [DC2's ONLY] - $85 shipped
.fits: bolts onto DC2 Integra ('94-'01) with JDM ITR header [2.5" collector]
.costs: JHPUSA 2.5" Collector Flange ($25), 3ft of Kteller 2.5" Stainless Steel Piping ($41), Borla 2.5" Stainless Steel Turn-Down ($52), and welding/hanger ($30)
.used a couple times
(1) ITR Cat-back Exhaust w/ Hytech Twin-loop Muffler - $300
.no 2nd resonator
.SMSP Stainless Steel 2.5" transition to cat (to use a 2.5" OUT cat)
.2.5" from the axle back
.it's probably gonna be a pick-up only piece since it's all one piece
(1) SMSP Carsound 2.5" 94066 Catalytic Converter - $145 shipped
.good condition
.used for maybe 8k miles
(1) Perma-cool Sandwich Plate Adapter [M20x1.5] - $15 shipped
.part number:
.used
.requires modification to work with a Honda
(1) AEM Fuel Filter [blue] - $90 shipped
.part number: AVM-25-200B
.replaceable filter element
(1) '95 GS-R Power Steering Pump - $35 shipped
(2) ITR PCV Joint Tube - $5 shipped each
.both unused, one is NIB
(1) OEM Honda '94-'01 Integra Paper Filter - $7 shipped
.slightly used and still good for another 10k miles or so
(1) OEM Honda Block Heater - $25 shipped
.used a couple of times last winter, otherwise new
(1) B18C1 Oil Dipstick - $10 shipped
(1) Defi 60mm BF Boost Gauge [NIB] - $185 shipped
.Open package and the gauge was removed for a test-fit/troubleshoot, and that's all.
(1) LS Fuel Feed Line - $50 shipped
.open package, othewise good as new
(1) OBD-1 P72 ECU - $95 shipped
.from a '95 GS-R
.failed #2 cylinder injector driver
AN Fittings & Adapters
-------------------------------------------------------------------------------------
(1) 1/2" NPT to 1/8" NPT Pipe Bushing [aluminum] - $5
.part number: FCM-2141
.retails for $7.99 @ Summit Racing
.new
(1) Accusump Check Valve - $15 shipped
.new, unused
(1) Earl's 1/8" NPT female coupler - $4
.part number: EAR-991001
.NIB
(1) Earl's -10AN to 1/2" NPT Tee on the Run Adapter - $10 shipped
.part number: 982610
.like new, unused
(2) Aeroquip 3/8" NPT to -10AN Flare Adapter [aluminum] - $4 each
.part number: FCM2185
.available at Summit Racing for $6.95
.one new, one used
(6ft) -4AN Nitrous Line - $25 shipped
(1) Autometer 1.5ft -4AN Braided Line - $20 shipped
(1) Aeroquip 3/8" NPT to -4AN Flare Steel Adapter - $3
Other Misc. Parts
------------------------------------------------------------------------------------
(13) Acura CL Open-Ended M12x1.5 Lug Nuts - $20 shipped
(1) '95 Integra Front Lug Stud
.free replacements for whomever has broken any of their's
(8) '95 Integra Rear Lug Studs - make an offer for all or any
.slightly longer than the front lug studs
(1pr) '01 Integra LS Front Shocks - $25 shipped
.sold as is shown in the picture
(2) '95 Integra Front Shock Dust Covers [metal] - $15 shipped
(1) EM Racing DC2 Rear Trunk Bar - $100 shipped
.new and unused
.includes mounting hardware
(1) Integra GS-R ECU Guard Plate - $10 shipped
(1) '95 Integra GS-R Cloth Rear Seats & Trunk Carpet [blk] - $50 + S&H
.good condition
.96k miles
(1) ZIF Socket - $5 shipped
.purchased from moates.net for $10
.high profile (blk)
(2) Rear Wiper Motors - $10 shipped each
(1) Wedge Seat Bracket - $85 shipped
.'94-'01 Integra Driver-side
.new and unused
(1pr) SRR DC2/EG Rear Adj Toe Arms - $80 shipped
.NIB
(1) Integra Spare Tire - $35 shipped
.4x100 lug pattern
.from my '95 GS-R
(2) Tein Standard 14 kg/mm Spring - $75 shipped
.used for about a year total since I don't use the Tein's in the winter season
(2) Tein Standard 16 kg/mm Spring - $75 shipped
.I ordered them and they were too much for me
.used not very much
Tools
-------------------------------------------------------------------------------------
(1 set) Generic Flex-joint Sockets - $15 shipped
.includes: 9mm, 10mm, 11mm, 13mm, 15mm, 17mm, 19mm
(1) Earl's AN Fitting Pressure Test Kit - $80 shipped
.part number:
.includes -3AN to -12AN
.never used
(1) Moroso 81.5mm Piston Installation Ring - $20 shipped
.part number: MOR-61902
.never used
.Summit price: $34.99
(1) Mitutoyo Depth Micrometer Set - $200 shipped
(1) Valve Lapping Tool - $5 shipped
(1) Sears Craftsman Beam-type Torque Wrench - $20 shipped
.0 to 75 lb*ft range
.never used
(1) Sears Craftsman Dial-Back Adjustable Timing Gun - $35 shipped
Books
-------------------------------------------------------------------------------------
(1) Race Car Aerodynamics (Designing for Speed) - $20 shipped
.author: Joseph Katz
PM me here, IM me at bchang378, or e-mail me at in_vtec@yahoo.com for questions or more pics.
I'm sure I'll dig up parts here and there as I go, so stuff changes all the time as I no longer find a use for them.
Ben
