FS: Fully built, All-motor B18a1, 180whp/141lb-ft
12-25-2004, 05:45 PM
#1
Member
Thread Starter
Join Date: Dec 2002
Location: 604, Canada
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
FS: Fully built, All-motor B18a1, 180whp/141lb-ft
Itching to start a new project...
work done:
Crower 404 race cams (300/290 duration, 0.445/0.435 lift)
Crower dual titanium valve springs
Crower titanium retainers
Skunk2 Cam gears
Skunk2 intake manifold
AEM Fuel Rail
B&M adjustable FPR
Spoon Throttle body (70mm)
Custom 3" CAI (can be Converted to short ram for winter)
Balanced & blue-printed bottom end
0.25mm oversize P73-a0 pistons
Knifed, lightened and balanced crank
ACT stage1 clutch
ACT 8lb flywheel
NGK 8mm Wires
MSD distributor cap
STR Cam plug seal
Greddy Timing Belt
NO TRANNY
NO PART-OUTS
NO HEADER
approx. 20,000kms on the motor
nothing but full-synthetic oil used
well maintained
no problems (not selling it because it has problems)
$3500obo (cdn)
work done:
Crower 404 race cams (300/290 duration, 0.445/0.435 lift)
Crower dual titanium valve springs
Crower titanium retainers
Skunk2 Cam gears
Skunk2 intake manifold
AEM Fuel Rail
B&M adjustable FPR
Spoon Throttle body (70mm)
Custom 3" CAI (can be Converted to short ram for winter)
Balanced & blue-printed bottom end
0.25mm oversize P73-a0 pistons
Knifed, lightened and balanced crank
ACT stage1 clutch
ACT 8lb flywheel
NGK 8mm Wires
MSD distributor cap
STR Cam plug seal
Greddy Timing Belt
NO TRANNY
NO PART-OUTS
NO HEADER
approx. 20,000kms on the motor
nothing but full-synthetic oil used
well maintained
no problems (not selling it because it has problems)
$3500obo (cdn)
12-25-2004, 05:47 PM
#2
Member
Thread Starter
Join Date: Dec 2002
Location: 604, Canada
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
12-25-2004, 05:49 PM
#3
Member
Thread Starter
Join Date: Dec 2002
Location: 604, Canada
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
I'm having a hard time remembering where I posted my motor for sale, so if you have any questions, the preferred method of contact is email:
Eclypz1@gmail.com
Eclypz1@gmail.com
01-04-2005, 06:20 PM
#9
Member
Thread Starter
Join Date: Dec 2002
Location: 604, Canada
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zo4000
what does it run in the 1/4mile,just curious. got a similar set-up
Good-luck on the sale
Good-luck on the sale
I launched at 4500rpm and broke the driver, passenger and intermediate shafts.
the best run i got was a 4K launch. Full interior, big brake upgrade, 3/4 tank of gas.
60': 2.4
1/4: 14.9