Program For Pilot Remote Fob
Thread Starter
Registered User
Joined: Jun 2005
Posts: 2
Likes: 0
Program For Pilot Remote Fob
I was wondering if someone has the Remote Fob Programming instructions for my 04 Pilot.
It pains me to pay the dealer $65 for 2 minutes of work to program the remote.
Thank you-
E
It pains me to pay the dealer $65 for 2 minutes of work to program the remote.
Thank you-
E
Heeltoe Auto Owner
Joined: Mar 2005
Posts: 9
Likes: 0
From: South OC, CA
Haha, I just did this yesterday on my newly purchased pilot!
Step one: Turn Ignition to "ON II"
Step Two: Press "Lock" or "Unlock" on one of your remotes once
Step Three: Turn Ignition to "Off"
Step Four: Repeat steps One through Three Two more times (total of 3 times). You should here the locks cycle.
Step Five: Click "lock" or "Unlock" on any additional remotes you have shortly after the first one.
Note that the remotes are now programmed. It through me off because I tried cycling the locks right away as I was sitting there, but you need to exit the vehicle and close the door before they start working. If you hear the locks cycle during programming and they still don't work, get out of the car and try them.
Every time you program a remote, you need to program all of them. Going through this sequence will change the codes and any remotes that you do not program at this time will not work.
I don't recall if you are permitted to 3 or 4 remotes, but there is a limit.
Step one: Turn Ignition to "ON II"
Step Two: Press "Lock" or "Unlock" on one of your remotes once
Step Three: Turn Ignition to "Off"
Step Four: Repeat steps One through Three Two more times (total of 3 times). You should here the locks cycle.
Step Five: Click "lock" or "Unlock" on any additional remotes you have shortly after the first one.
Note that the remotes are now programmed. It through me off because I tried cycling the locks right away as I was sitting there, but you need to exit the vehicle and close the door before they start working. If you hear the locks cycle during programming and they still don't work, get out of the car and try them.
Every time you program a remote, you need to program all of them. Going through this sequence will change the codes and any remotes that you do not program at this time will not work.
I don't recall if you are permitted to 3 or 4 remotes, but there is a limit.