ABS Effecting Mods
Thread Starter
Junior Member
Joined: May 2003
Posts: 28
Likes: 0
From: Texas
ABS Effecting Mods
I think my ABS Components on my 91 GS are in the way of any intake or front strut bar. Is there anyone/anywhere that makes intake and strut bars for Integras with ABS?
Wannabe yuppie
Joined: Dec 2000
Posts: 25,918
Likes: 0
From: Madison, WI
These bars will fit:
Spoon $195 @ optauto.com
GAB $160 @ alamomotorsports.com
Cusco Type ST $138 @ optaut.com
GReddy $87 @ optauto.com
Tenzo $42 @ optauto.com
Others that can be found used are:
Momo Corse
Matrix
OBX
Pilot
Lightspeed
Z-Speed
Spoon $195 @ optauto.com
GAB $160 @ alamomotorsports.com
Cusco Type ST $138 @ optaut.com
GReddy $87 @ optauto.com
Tenzo $42 @ optauto.com
Others that can be found used are:
Momo Corse
Matrix
OBX
Pilot
Lightspeed
Z-Speed
Wannabe yuppie
Joined: Dec 2000
Posts: 25,918
Likes: 0
From: Madison, WI
That site is really well organized man. All you have to do is go to Suspension>Strut & Tie Bars>Strut Bars>Acura>Integra 90-93.
But if you really want a link then fine. Here's that section on optauto.com: http://www.optauto.com/webstore/prod...t=924&last=924
But if you really want a link then fine. Here's that section on optauto.com: http://www.optauto.com/webstore/prod...t=924&last=924
