Can anyone give me a link or photo of a GSR Distributor Cap plug wire locations. (where the wires from each spark plug go to the distributor cap) A friend of mine jumbled his all up and I don't know off the top of my head which one goes where. I ran a search and I couldn't really find anything. Any help would be greatly appreciated.

THANKS

 

Lemme go out and take pics for you

 

Awesome!! That would be a great help!

 

the firing order is 1 3 4 2....cylinder 1 is the one on the far right if you are staring at the engine. Now for the cap. I'll try to explain this to you as best i can since i just recently put new wires on my car. If you are staring at the cap from the the passenger side of the car ,he bottom prong on the left side is where the wire from cyl 1 goes. After you plug that up,continue clockwise around the cap remembering the order is 1 3 4 2. Hopefully this isnt too confusing.

 

no numbers on the cap?

 

I can't find my camera :madfawk:

 

it's night right now but in the morning i'll hock u up

 

The cap should have a 1 or a mark where piston 1 wire goes. Then you just make the firing order of 1342. I'm not sure if it's counterclockwise or clockwise but you can use trial and error to get this worked out.

 

GREAT:thumbup: Got it all worked out. THANKS ALOT FOR ALL THE HELP!