I just bought a set of clear corners and before ripping off my stock ones, I wanted to know if there is anything more complicated in the installation than unscrewing the single screw and pulling of the light. Are there wires to unplug? If anyone has pics of this simple install or a site with pics, that would be greatly appreciated.

 

oh by the way, this install will be on a 98 LS

 

you are the epitome of a noobie h:

 

www.team-integra.net Probably has something, but you won't need it if you've ever turned a screwdriver. You might want to pick up two Torx or hex screws that fit the lights. It'll keep thieves from stealing them (as often)

 

it is very simple. You just have to jiggle the corners out after you unscrew them. Thats about it man. Good luck. What color is your teg?

 

Funny as it may sound, sometimes my corners got "stuck", just dont use a screw driver to wedge them out, you're dent/scratch the paint. I know on the older 94-97 corners, they dont get stuck, but on the 98-01, the stock ambers have a really tight fit, almost virgin like.

 

Yeah sorry about this question guys I know its really lame, I just was wondering if there was anything I needed to do BESIDES the obvious stuff. I thought I remember reading somewhere about sealing them with silicone or something like that. Anyways, thanks for the advice. BTW its the same color as yours Bonzo :thumbup:

 

you will have to twist the light sockets/bulbs out as well, there 1/4 turn sockets and will only fit one way,